Fossil

**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.28.0"
#define SQLITE_VERSION_NUMBER 3028000
#define SQLITE_SOURCE_ID      "2019-04-10 18:29:40 f294cfc173c5653ef161dbff63b7838dbccdcad797f5163c49b3173f9f35ab0f"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
................................................................................
** the hash table.
*/
struct Hash {
  unsigned int htsize;      /* Number of buckets in the hash table */
  unsigned int count;       /* Number of entries in this table */
  HashElem *first;          /* The first element of the array */
  struct _ht {              /* the hash table */
    int count;                 /* Number of entries with this hash */
    HashElem *chain;           /* Pointer to first entry with this hash */
  } *ht;
};

/* Each element in the hash table is an instance of the following 
** structure.  All elements are stored on a single doubly-linked list.
**
................................................................................
#ifndef SQLITE_OMIT_UTF16
/*
** This routine transforms the internal text encoding used by pMem to
** desiredEnc. It is an error if the string is already of the desired
** encoding, or if *pMem does not contain a string value.
*/
SQLITE_PRIVATE SQLITE_NOINLINE int sqlite3VdbeMemTranslate(Mem *pMem, u8 desiredEnc){
  int len;                    /* Maximum length of output string in bytes */
  unsigned char *zOut;                  /* Output buffer */
  unsigned char *zIn;                   /* Input iterator */
  unsigned char *zTerm;                 /* End of input */
  unsigned char *z;                     /* Output iterator */
  unsigned int c;

  assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
  assert( pMem->flags&MEM_Str );
  assert( pMem->enc!=desiredEnc );
  assert( pMem->enc!=0 );
  assert( pMem->n>=0 );
................................................................................
  if( desiredEnc==SQLITE_UTF8 ){
    /* When converting from UTF-16, the maximum growth results from
    ** translating a 2-byte character to a 4-byte UTF-8 character.
    ** A single byte is required for the output string
    ** nul-terminator.
    */
    pMem->n &= ~1;
    len = pMem->n * 2 + 1;
  }else{
    /* When converting from UTF-8 to UTF-16 the maximum growth is caused
    ** when a 1-byte UTF-8 character is translated into a 2-byte UTF-16
    ** character. Two bytes are required in the output buffer for the
    ** nul-terminator.
    */
    len = pMem->n * 2 + 2;
  }

  /* Set zIn to point at the start of the input buffer and zTerm to point 1
  ** byte past the end.
  **
  ** Variable zOut is set to point at the output buffer, space obtained
  ** from sqlite3_malloc().
................................................................................
  char *z;               /* Pointer to where zName will be stored */
  int i;                 /* Index in pIn[] where zName is stored */

  nInt = nName/4 + 3;
  assert( pIn==0 || pIn[0]>=3 );  /* Verify ok to add new elements */
  if( pIn==0 || pIn[1]+nInt > pIn[0] ){
    /* Enlarge the allocation */
    int nAlloc = (pIn ? pIn[0]*2 : 10) + nInt;
    VList *pOut = sqlite3DbRealloc(db, pIn, nAlloc*sizeof(int));
    if( pOut==0 ) return pIn;
    if( pIn==0 ) pOut[1] = 2;
    pIn = pOut;
    pIn[0] = nAlloc;
  }
  i = pIn[1];
................................................................................
*/
static HashElem *findElementWithHash(
  const Hash *pH,     /* The pH to be searched */
  const char *pKey,   /* The key we are searching for */
  unsigned int *pHash /* Write the hash value here */
){
  HashElem *elem;                /* Used to loop thru the element list */
  int count;                     /* Number of elements left to test */
  unsigned int h;                /* The computed hash */
  static HashElem nullElement = { 0, 0, 0, 0 };

  if( pH->ht ){   /*OPTIMIZATION-IF-TRUE*/
    struct _ht *pEntry;
    h = strHash(pKey) % pH->htsize;
    pEntry = &pH->ht[h];
................................................................................
    elem->next->prev = elem->prev;
  }
  if( pH->ht ){
    pEntry = &pH->ht[h];
    if( pEntry->chain==elem ){
      pEntry->chain = elem->next;
    }
    pEntry->count--;
    assert( pEntry->count>=0 );
  }
  sqlite3_free( elem );
  pH->count--;
  if( pH->count==0 ){
    assert( pH->first==0 );
    assert( pH->count==0 );
    sqlite3HashClear(pH);
................................................................................

/*
** Malloc function used by SQLite to obtain space from the buffer configured
** using sqlite3_config(SQLITE_CONFIG_PAGECACHE) option. If no such buffer
** exists, this function falls back to sqlite3Malloc().
*/
SQLITE_PRIVATE void *sqlite3PageMalloc(int sz){
  /* During rebalance operations on a corrupt database file, it is sometimes
  ** (rarely) possible to overread the temporary page buffer by a few bytes.
  ** Enlarge the allocation slightly so that this does not cause problems. */
  return pcache1Alloc(sz);
}

/*
** Free an allocated buffer obtained from sqlite3PageMalloc().
*/
SQLITE_PRIVATE void sqlite3PageFree(void *p){
................................................................................
  int iPage,               /* The page we seek */
  volatile u32 **ppPage    /* Write the page pointer here */
){
  int rc = SQLITE_OK;

  /* Enlarge the pWal->apWiData[] array if required */
  if( pWal->nWiData<=iPage ){
    int nByte = sizeof(u32*)*(iPage+1);
    volatile u32 **apNew;
    apNew = (volatile u32 **)sqlite3_realloc64((void *)pWal->apWiData, nByte);
    if( !apNew ){
      *ppPage = 0;
      return SQLITE_NOMEM_BKPT;
    }
    memset((void*)&apNew[pWal->nWiData], 0,
................................................................................
    s2 = aIn[1];
  }else{
    s1 = s2 = 0;
  }

  assert( nByte>=8 );
  assert( (nByte&0x00000007)==0 );


  if( nativeCksum ){
    do {
      s1 += *aData++ + s2;
      s2 += *aData++ + s1;
    }while( aData<aEnd );
  }else{
................................................................................
** The calling routine should invoke walIteratorFree() to destroy the
** WalIterator object when it has finished with it.
*/
static int walIteratorInit(Wal *pWal, u32 nBackfill, WalIterator **pp){
  WalIterator *p;                 /* Return value */
  int nSegment;                   /* Number of segments to merge */
  u32 iLast;                      /* Last frame in log */
  int nByte;                      /* Number of bytes to allocate */
  int i;                          /* Iterator variable */
  ht_slot *aTmp;                  /* Temp space used by merge-sort */
  int rc = SQLITE_OK;             /* Return Code */

  /* This routine only runs while holding the checkpoint lock. And
  ** it only runs if there is actually content in the log (mxFrame>0).
  */
................................................................................
  ** more frequent reallocs and hence provide more opportunities for 
  ** simulated OOM faults.  SQLITE_TEST_REALLOC_STRESS is generally used
  ** during testing only.  With SQLITE_TEST_REALLOC_STRESS grow the op array
  ** by the minimum* amount required until the size reaches 512.  Normal
  ** operation (without SQLITE_TEST_REALLOC_STRESS) is to double the current
  ** size of the op array or add 1KB of space, whichever is smaller. */
#ifdef SQLITE_TEST_REALLOC_STRESS
  int nNew = (v->nOpAlloc>=512 ? v->nOpAlloc*2 : v->nOpAlloc+nOp);

#else

  int nNew = (v->nOpAlloc ? v->nOpAlloc*2 : (int)(1024/sizeof(Op)));
  UNUSED_PARAMETER(nOp);
#endif

  /* Ensure that the size of a VDBE does not grow too large */
  if( nNew > p->db->aLimit[SQLITE_LIMIT_VDBE_OP] ){
    sqlite3OomFault(p->db);
    return SQLITE_NOMEM;
................................................................................
  Vdbe *p,                        /* VM to add scanstatus() to */
  int addrExplain,                /* Address of OP_Explain (or 0) */
  int addrLoop,                   /* Address of loop counter */ 
  int addrVisit,                  /* Address of rows visited counter */
  LogEst nEst,                    /* Estimated number of output rows */
  const char *zName               /* Name of table or index being scanned */
){
  int nByte = (p->nScan+1) * sizeof(ScanStatus);
  ScanStatus *aNew;
  aNew = (ScanStatus*)sqlite3DbRealloc(p->db, p->aScan, nByte);
  if( aNew ){
    ScanStatus *pNew = &aNew[p->nScan++];
    pNew->addrExplain = addrExplain;
    pNew->addrLoop = addrLoop;
    pNew->addrVisit = addrVisit;
................................................................................
#endif /* !SQLITE_OMIT_TRACE && SQLITE_ENABLE_IOTRACE */

/* An instance of this object describes bulk memory available for use
** by subcomponents of a prepared statement.  Space is allocated out
** of a ReusableSpace object by the allocSpace() routine below.
*/
struct ReusableSpace {
  u8 *pSpace;          /* Available memory */
  int nFree;           /* Bytes of available memory */
  int nNeeded;         /* Total bytes that could not be allocated */
};

/* Try to allocate nByte bytes of 8-byte aligned bulk memory for pBuf
** from the ReusableSpace object.  Return a pointer to the allocated
** memory on success.  If insufficient memory is available in the
** ReusableSpace object, increase the ReusableSpace.nNeeded
** value by the amount needed and return NULL.
................................................................................
** This allocator is employed to repurpose unused slots at the end of the
** opcode array of prepared state for other memory needs of the prepared
** statement.
*/
static void *allocSpace(
  struct ReusableSpace *p,  /* Bulk memory available for allocation */
  void *pBuf,               /* Pointer to a prior allocation */
  int nByte                 /* Bytes of memory needed */
){
  assert( EIGHT_BYTE_ALIGNMENT(p->pSpace) );
  if( pBuf==0 ){
    nByte = ROUND8(nByte);
    if( nByte <= p->nFree ){
      p->nFree -= nByte;
      pBuf = &p->pSpace[p->nFree];
................................................................................
  sqlite3_int64 iElapse;
  assert( p->startTime>0 );
  assert( (db->mTrace & (SQLITE_TRACE_PROFILE|SQLITE_TRACE_XPROFILE))!=0 );
  assert( db->init.busy==0 );
  assert( p->zSql!=0 );
  sqlite3OsCurrentTimeInt64(db->pVfs, &iNow);
  iElapse = (iNow - p->startTime)*1000000;
#ifndef SQLITE_OMIT_DEPRECATED  	
  if( db->xProfile ){
    db->xProfile(db->pProfileArg, p->zSql, iElapse);
  }
#endif
  if( db->mTrace & SQLITE_TRACE_PROFILE ){
    db->xTrace(SQLITE_TRACE_PROFILE, db->pTraceArg, p, (void*)&iElapse);
  }
................................................................................
    ** In this case, allocate space at p->aAlloc[] to copy the requested
    ** range into. Then return a copy of pointer p->aAlloc to the caller.  */
    int nRem;                     /* Bytes remaining to copy */

    /* Extend the p->aAlloc[] allocation if required. */
    if( p->nAlloc<nByte ){
      u8 *aNew;
      int nNew = MAX(128, p->nAlloc*2);
      while( nByte>nNew ) nNew = nNew*2;
      aNew = sqlite3Realloc(p->aAlloc, nNew);
      if( !aNew ) return SQLITE_NOMEM_BKPT;
      p->nAlloc = nNew;
      p->aAlloc = aNew;
    }

................................................................................
  }

  if( pSorter->list.aMemory ){
    int nMin = pSorter->iMemory + nReq;

    if( nMin>pSorter->nMemory ){
      u8 *aNew;



      int iListOff = (u8*)pSorter->list.pList - pSorter->list.aMemory;
      int nNew = pSorter->nMemory * 2;

      while( nNew < nMin ) nNew = nNew*2;
      if( nNew > pSorter->mxPmaSize ) nNew = pSorter->mxPmaSize;
      if( nNew < nMin ) nNew = nMin;

      aNew = sqlite3Realloc(pSorter->list.aMemory, nNew);
      if( !aNew ) return SQLITE_NOMEM_BKPT;

      pSorter->list.pList = (SorterRecord*)&aNew[iListOff];

      pSorter->list.aMemory = aNew;
      pSorter->nMemory = nNew;
    }

    pNew = (SorterRecord*)&pSorter->list.aMemory[pSorter->iMemory];
    pSorter->iMemory += ROUND8(nReq);
    if( pSorter->list.pList ){
................................................................................
** argument. If an OOM condition is encountered, NULL is returned
** and the db->mallocFailed flag set.
*/
#ifndef SQLITE_OMIT_CTE
static With *withDup(sqlite3 *db, With *p){
  With *pRet = 0;
  if( p ){
    int nByte = sizeof(*p) + sizeof(p->a[0]) * (p->nCte-1);
    pRet = sqlite3DbMallocZero(db, nByte);
    if( pRet ){
      int i;
      pRet->nCte = p->nCte;
      for(i=0; i<p->nCte; i++){
        pRet->a[i].pSelect = sqlite3SelectDup(db, p->a[i].pSelect, 0);
        pRet->a[i].pCols = sqlite3ExprListDup(db, p->a[i].pCols, 0);
................................................................................
    if( pList==0 ){
      goto no_mem;
    }
    pList->nExpr = 0;
  }else if( (pList->nExpr & (pList->nExpr-1))==0 ){
    ExprList *pNew;
    pNew = sqlite3DbRealloc(db, pList, 
             sizeof(*pList)+(2*pList->nExpr - 1)*sizeof(pList->a[0]));
    if( pNew==0 ){
      goto no_mem;
    }
    pList = pNew;
  }
  pItem = &pList->a[pList->nExpr++];
  assert( offsetof(struct ExprList_item,zName)==sizeof(pItem->pExpr) );
................................................................................
    if( !REOPEN_AS_MEMDB(db) ){
      rc = sqlite3Init(db, &zErrDyn);
    }
    sqlite3BtreeLeaveAll(db);
    assert( zErrDyn==0 || rc!=SQLITE_OK );
  }
#ifdef SQLITE_USER_AUTHENTICATION
  if( rc==SQLITE_OK ){
    u8 newAuth = 0;
    rc = sqlite3UserAuthCheckLogin(db, zName, &newAuth);
    if( newAuth<db->auth.authLevel ){
      rc = SQLITE_AUTH_USER;
    }
  }
#endif
................................................................................
  sqlite3 *db,      /* Connection to notify of malloc failures */
  void *pArray,     /* Array of objects.  Might be reallocated */
  int szEntry,      /* Size of each object in the array */
  int *pnEntry,     /* Number of objects currently in use */
  int *pIdx         /* Write the index of a new slot here */
){
  char *z;
  int n = *pnEntry;
  if( (n & (n-1))==0 ){
    int sz = (n==0) ? 1 : 2*n;
    void *pNew = sqlite3DbRealloc(db, pArray, sz*szEntry);
    if( pNew==0 ){
      *pIdx = -1;
      return pArray;
    }
    pArray = pNew;
  }
  z = (char*)pArray;
  memset(&z[n * szEntry], 0, szEntry);
  *pIdx = n;
  ++*pnEntry;
  return pArray;
}

/*
** Append a new element to the given IdList.  Create a new IdList if
** need be.
................................................................................
  assert( nExtra>=1 );
  assert( pSrc!=0 );
  assert( iStart<=pSrc->nSrc );

  /* Allocate additional space if needed */
  if( (u32)pSrc->nSrc+nExtra>pSrc->nAlloc ){
    SrcList *pNew;
    int nAlloc = pSrc->nSrc*2+nExtra;
    sqlite3 *db = pParse->db;

    if( pSrc->nSrc+nExtra>=SQLITE_MAX_SRCLIST ){
      sqlite3ErrorMsg(pParse, "too many FROM clause terms, max: %d",
                      SQLITE_MAX_SRCLIST);
      return 0;
    }
................................................................................
      if( sqlite3StrICmp(zName, pWith->a[i].zName)==0 ){
        sqlite3ErrorMsg(pParse, "duplicate WITH table name: %s", zName);
      }
    }
  }

  if( pWith ){
    int nByte = sizeof(*pWith) + (sizeof(pWith->a[1]) * pWith->nCte);
    pNew = sqlite3DbRealloc(db, pWith, nByte);
  }else{
    pNew = sqlite3DbMallocZero(db, sizeof(*pWith));
  }
  assert( (pNew!=0 && zName!=0) || db->mallocFailed );

  if( db->mallocFailed ){
................................................................................

/*
** Add a new module argument to pTable->azModuleArg[].
** The string is not copied - the pointer is stored.  The
** string will be freed automatically when the table is
** deleted.
*/
static void addModuleArgument(sqlite3 *db, Table *pTable, char *zArg){
  int nBytes = sizeof(char *)*(2+pTable->nModuleArg);
  char **azModuleArg;




  azModuleArg = sqlite3DbRealloc(db, pTable->azModuleArg, nBytes);
  if( azModuleArg==0 ){
    sqlite3DbFree(db, zArg);
  }else{
    int i = pTable->nModuleArg++;
    azModuleArg[i] = zArg;
    azModuleArg[i+1] = 0;
................................................................................
  pTable = pParse->pNewTable;
  if( pTable==0 ) return;
  assert( 0==pTable->pIndex );

  db = pParse->db;

  assert( pTable->nModuleArg==0 );
  addModuleArgument(db, pTable, sqlite3NameFromToken(db, pModuleName));
  addModuleArgument(db, pTable, 0);
  addModuleArgument(db, pTable, sqlite3DbStrDup(db, pTable->zName));
  assert( (pParse->sNameToken.z==pName2->z && pName2->z!=0)
       || (pParse->sNameToken.z==pName1->z && pName2->z==0)
  );
  pParse->sNameToken.n = (int)(
      &pModuleName->z[pModuleName->n] - pParse->sNameToken.z
  );

................................................................................
** virtual table currently under construction in pParse->pTable.
*/
static void addArgumentToVtab(Parse *pParse){
  if( pParse->sArg.z && pParse->pNewTable ){
    const char *z = (const char*)pParse->sArg.z;
    int n = pParse->sArg.n;
    sqlite3 *db = pParse->db;
    addModuleArgument(db, pParse->pNewTable, sqlite3DbStrNDup(db, z, n));
  }
}

/*
** The parser calls this routine after the CREATE VIRTUAL TABLE statement
** has been completely parsed.
*/
................................................................................
*/
static int growVTrans(sqlite3 *db){
  const int ARRAY_INCR = 5;

  /* Grow the sqlite3.aVTrans array if required */
  if( (db->nVTrans%ARRAY_INCR)==0 ){
    VTable **aVTrans;
    int nBytes = sizeof(sqlite3_vtab *) * (db->nVTrans + ARRAY_INCR);

    aVTrans = sqlite3DbRealloc(db, (void *)db->aVTrans, nBytes);
    if( !aVTrans ){
      return SQLITE_NOMEM_BKPT;
    }
    memset(&aVTrans[db->nVTrans], 0, sizeof(sqlite3_vtab *)*ARRAY_INCR);
    db->aVTrans = aVTrans;
  }
................................................................................
    return 0;
  }
  pMod->pEpoTab = pTab;
  pTab->nTabRef = 1;
  pTab->pSchema = db->aDb[0].pSchema;
  assert( pTab->nModuleArg==0 );
  pTab->iPKey = -1;
  addModuleArgument(db, pTab, sqlite3DbStrDup(db, pTab->zName));
  addModuleArgument(db, pTab, 0);
  addModuleArgument(db, pTab, sqlite3DbStrDup(db, pTab->zName));
  rc = vtabCallConstructor(db, pTab, pMod, pModule->xConnect, &zErr);
  if( rc ){
    sqlite3ErrorMsg(pParse, "%s", zErr);
    sqlite3DbFree(db, zErr);
    sqlite3VtabEponymousTableClear(db, pMod);
    return 0;
  }
................................................................................
  if( sz<=(int)sizeof(LookasideSlot*) ) sz = 0;
  if( cnt<0 ) cnt = 0;
  if( sz==0 || cnt==0 ){
    sz = 0;
    pStart = 0;
  }else if( pBuf==0 ){
    sqlite3BeginBenignMalloc();
    pStart = sqlite3Malloc( sz*cnt );  /* IMP: R-61949-35727 */
    sqlite3EndBenignMalloc();
    if( pStart ) cnt = sqlite3MallocSize(pStart)/sz;
  }else{
    pStart = pBuf;
  }
  db->lookaside.pStart = pStart;
  db->lookaside.pInit = 0;
................................................................................
    sqlite3Fts3ErrMsg(pzErr, "unknown tokenizer: %s", z);
    rc = SQLITE_ERROR;
  }else{
    char const **aArg = 0;
    int iArg = 0;
    z = &z[n+1];
    while( z<zEnd && (NULL!=(z = (char *)sqlite3Fts3NextToken(z, &n))) ){
      int nNew = sizeof(char *)*(iArg+1);
      char const **aNew = (const char **)sqlite3_realloc((void *)aArg, nNew);
      if( !aNew ){
        sqlite3_free(zCopy);
        sqlite3_free((void *)aArg);
        return SQLITE_NOMEM;
      }
      aArg = aNew;
      aArg[iArg++] = z;
................................................................................
  UNUSED_PARAMETER(idxStr);
  UNUSED_PARAMETER(nVal);

  fts3tokResetCursor(pCsr);
  if( idxNum==1 ){
    const char *zByte = (const char *)sqlite3_value_text(apVal[0]);
    int nByte = sqlite3_value_bytes(apVal[0]);
    pCsr->zInput = sqlite3_malloc(nByte+1);
    if( pCsr->zInput==0 ){
      rc = SQLITE_NOMEM;
    }else{
      memcpy(pCsr->zInput, zByte, nByte);
      pCsr->zInput[nByte] = 0;
      rc = pTab->pMod->xOpen(pTab->pTok, pCsr->zInput, nByte, &pCsr->pCsr);
      if( rc==SQLITE_OK ){
................................................................................
    if( pE ){
      aElem = &pE;
      nElem = 1;
    }
  }

  if( nElem>0 ){

    int nByte = sizeof(Fts3SegReader) + (nElem+1)*sizeof(Fts3HashElem *);
    pReader = (Fts3SegReader *)sqlite3_malloc(nByte);
    if( !pReader ){
      rc = SQLITE_NOMEM;
    }else{
      memset(pReader, 0, nByte);
      pReader->iIdx = 0x7FFFFFFF;
      pReader->ppNextElem = (Fts3HashElem **)&pReader[1];
      memcpy(pReader->ppNextElem, aElem, nElem*sizeof(Fts3HashElem *));
................................................................................
){
  char *pBlob;             /* The BLOB encoding of the document size */
  int nBlob;               /* Number of bytes in the BLOB */
  sqlite3_stmt *pStmt;     /* Statement used to insert the encoding */
  int rc;                  /* Result code from subfunctions */

  if( *pRC ) return;
  pBlob = sqlite3_malloc( 10*p->nColumn );
  if( pBlob==0 ){
    *pRC = SQLITE_NOMEM;
    return;
  }
  fts3EncodeIntArray(p->nColumn, aSz, pBlob, &nBlob);
  rc = fts3SqlStmt(p, SQL_REPLACE_DOCSIZE, &pStmt, 0);
  if( rc ){
................................................................................
  sqlite3_stmt *pStmt;     /* Statement for reading and writing */
  int i;                   /* Loop counter */
  int rc;                  /* Result code from subfunctions */

  const int nStat = p->nColumn+2;

  if( *pRC ) return;
  a = sqlite3_malloc( (sizeof(u32)+10)*nStat );
  if( a==0 ){
    *pRC = SQLITE_NOMEM;
    return;
  }
  pBlob = (char*)&a[nStat];
  rc = fts3SqlStmt(p, SQL_SELECT_STAT, &pStmt, 0);
  if( rc ){
................................................................................
      rc = SQLITE_NOMEM;
    }else{
      rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0);
      sqlite3_free(zSql);
    }

    if( rc==SQLITE_OK ){
      int nByte = sizeof(u32) * (p->nColumn+1)*3;
      aSz = (u32 *)sqlite3_malloc(nByte);
      if( aSz==0 ){
        rc = SQLITE_NOMEM;
      }else{
        memset(aSz, 0, nByte);
        aSzIns = &aSz[p->nColumn+1];
        aSzDel = &aSzIns[p->nColumn+1];
      }
................................................................................
  Fts3Table *p,                   /* FTS3 table handle */
  sqlite3_int64 iAbsLevel,        /* Absolute level to open */
  int nSeg,                       /* Number of segments to merge */
  Fts3MultiSegReader *pCsr        /* Cursor object to populate */
){
  int rc;                         /* Return Code */
  sqlite3_stmt *pStmt = 0;        /* Statement used to read %_segdir entry */  
  int nByte;                      /* Bytes allocated at pCsr->apSegment[] */

  /* Allocate space for the Fts3MultiSegReader.aCsr[] array */
  memset(pCsr, 0, sizeof(*pCsr));
  nByte = sizeof(Fts3SegReader *) * nSeg;
  pCsr->apSegment = (Fts3SegReader **)sqlite3_malloc(nByte);

  if( pCsr->apSegment==0 ){
    rc = SQLITE_NOMEM;
  }else{
    memset(pCsr->apSegment, 0, nByte);
    rc = fts3SqlStmt(p, SQL_SELECT_LEVEL, &pStmt, 0);
  }
................................................................................

  if( nArg>1 && sqlite3_value_int(apVal[2 + p->nColumn + 2])<0 ){
    rc = SQLITE_CONSTRAINT;
    goto update_out;
  }

  /* Allocate space to hold the change in document sizes */
  aSzDel = sqlite3_malloc( sizeof(aSzDel[0])*(p->nColumn+1)*2 );
  if( aSzDel==0 ){
    rc = SQLITE_NOMEM;
    goto update_out;
  }
  aSzIns = &aSzDel[p->nColumn+1];
  memset(aSzDel, 0, sizeof(aSzDel[0])*(p->nColumn+1)*2);

................................................................................
/*************************************************************************
** Start of MatchinfoBuffer code.
*/

/*
** Allocate a two-slot MatchinfoBuffer object.
*/
static MatchinfoBuffer *fts3MIBufferNew(int nElem, const char *zMatchinfo){
  MatchinfoBuffer *pRet;
  int nByte = sizeof(u32) * (2*nElem + 1) + sizeof(MatchinfoBuffer);
  int nStr = (int)strlen(zMatchinfo);


  pRet = sqlite3_malloc(nByte + nStr+1);
  if( pRet ){
    memset(pRet, 0, nByte);
    pRet->aMatchinfo[0] = (u8*)(&pRet->aMatchinfo[1]) - (u8*)pRet;
    pRet->aMatchinfo[1+nElem] = pRet->aMatchinfo[0] + sizeof(u32)*(nElem+1);

    pRet->nElem = nElem;
    pRet->zMatchinfo = ((char*)pRet) + nByte;
    memcpy(pRet->zMatchinfo, zMatchinfo, nStr+1);
    pRet->aRef[0] = 1;
  }

  return pRet;
}
................................................................................
  ){
    return SQLITE_OK;
  }
  sqlite3Fts3ErrMsg(pzErr, "unrecognized matchinfo request: %c", cArg);
  return SQLITE_ERROR;
}

static int fts3MatchinfoSize(MatchInfo *pInfo, char cArg){
  int nVal;                       /* Number of integers output by cArg */

  switch( cArg ){
    case FTS3_MATCHINFO_NDOC:
    case FTS3_MATCHINFO_NPHRASE: 
    case FTS3_MATCHINFO_NCOL: 
      nVal = 1;
      break;
................................................................................
        if( rc==SQLITE_OK ){
          rc = fts3MatchinfoLcs(pCsr, pInfo);
        }
        break;

      case FTS3_MATCHINFO_LHITS_BM:
      case FTS3_MATCHINFO_LHITS: {
        int nZero = fts3MatchinfoSize(pInfo, zArg[i]) * sizeof(u32);
        memset(pInfo->aMatchinfo, 0, nZero);
        rc = fts3ExprLHitGather(pCsr->pExpr, pInfo);
        break;
      }

      default: {
        Fts3Expr *pExpr;
................................................................................

  /* If Fts3Cursor.pMIBuffer is NULL, then this is the first time the
  ** matchinfo function has been called for this query. In this case 
  ** allocate the array used to accumulate the matchinfo data and
  ** initialize those elements that are constant for every row.
  */
  if( pCsr->pMIBuffer==0 ){
    int nMatchinfo = 0;           /* Number of u32 elements in match-info */
    int i;                        /* Used to iterate through zArg */

    /* Determine the number of phrases in the query */
    pCsr->nPhrase = fts3ExprPhraseCount(pCsr->pExpr);
    sInfo.nPhrase = pCsr->nPhrase;

    /* Determine the number of integers in the buffer returned by this call. */
................................................................................
     && s.a[0]==s.a[s.nVertex*2-2]
     && s.a[1]==s.a[s.nVertex*2-1]
     && (s.z++, geopolySkipSpace(&s)==0)
    ){
      GeoPoly *pOut;
      int x = 1;
      s.nVertex--;  /* Remove the redundant vertex at the end */
      pOut = sqlite3_malloc64( GEOPOLY_SZ(s.nVertex) );
      x = 1;
      if( pOut==0 ) goto parse_json_err;
      pOut->nVertex = s.nVertex;
      memcpy(pOut->a, s.a, s.nVertex*2*sizeof(GeoCoord));
      pOut->hdr[0] = *(unsigned char*)&x;
      pOut->hdr[1] = (s.nVertex>>16)&0xff;
      pOut->hdr[2] = (s.nVertex>>8)&0xff;
................................................................................
      r = GeoY(p,ii);
      if( r<mnY ) mnY = (float)r;
      else if( r>mxY ) mxY = (float)r;
    }
    if( pRc ) *pRc = SQLITE_OK;
    if( aCoord==0 ){
      geopolyBboxFill:
      pOut = sqlite3_realloc(p, GEOPOLY_SZ(4));
      if( pOut==0 ){
        sqlite3_free(p);
        if( context ) sqlite3_result_error_nomem(context);
        if( pRc ) *pRc = SQLITE_NOMEM;
        return 0;
      }
      pOut->nVertex = 4;
................................................................................
  return p;
}

/*
** Determine the overlap between two polygons
*/
static int geopolyOverlap(GeoPoly *p1, GeoPoly *p2){
  int nVertex = p1->nVertex + p2->nVertex + 2;
  GeoOverlap *p;
  int nByte;
  GeoEvent *pThisEvent;
  double rX;
  int rc = 0;
  int needSort = 0;
  GeoSegment *pActive = 0;
  GeoSegment *pSeg;
  unsigned char aOverlap[4];

  nByte = sizeof(GeoEvent)*nVertex*2 
           + sizeof(GeoSegment)*nVertex 
           + sizeof(GeoOverlap);
  p = sqlite3_malloc( nByte );
  if( p==0 ) return -1;
  p->aEvent = (GeoEvent*)&p[1];
  p->aSegment = (GeoSegment*)&p->aEvent[nVertex*2];
  p->nEvent = p->nSegment = 0;
  geopolyAddSegments(p, p1, 1);
  geopolyAddSegments(p, p2, 2);
  pThisEvent = geopolySortEventsByX(p->aEvent, p->nEvent);
................................................................................
  int argc, const char *const*argv,   /* Parameters to CREATE TABLE statement */
  sqlite3_vtab **ppVtab,              /* OUT: New virtual table */
  char **pzErr,                       /* OUT: Error message, if any */
  int isCreate                        /* True for xCreate, false for xConnect */
){
  int rc = SQLITE_OK;
  Rtree *pRtree;
  int nDb;              /* Length of string argv[1] */
  int nName;            /* Length of string argv[2] */
  sqlite3_str *pSql;
  char *zSql;
  int ii;

  sqlite3_vtab_config(db, SQLITE_VTAB_CONSTRAINT_SUPPORT, 1);

  /* Allocate the sqlite3_vtab structure */
  nDb = (int)strlen(argv[1]);
  nName = (int)strlen(argv[2]);
  pRtree = (Rtree *)sqlite3_malloc(sizeof(Rtree)+nDb+nName+2);
  if( !pRtree ){
    return SQLITE_NOMEM;
  }
  memset(pRtree, 0, sizeof(Rtree)+nDb+nName+2);
  pRtree->nBusy = 1;
  pRtree->base.pModule = &rtreeModule;
  pRtree->zDb = (char *)&pRtree[1];
................................................................................
**     * a special "cleanup table" state.
**
** abIndexed:
**   If the table has no indexes on it, abIndexed is set to NULL. Otherwise,
**   it points to an array of flags nTblCol elements in size. The flag is
**   set for each column that is either a part of the PK or a part of an
**   index. Or clear otherwise.





**   
*/
struct RbuObjIter {
  sqlite3_stmt *pTblIter;         /* Iterate through tables */
  sqlite3_stmt *pIdxIter;         /* Index iterator */
  int nTblCol;                    /* Size of azTblCol[] array */
  char **azTblCol;                /* Array of unquoted target column names */
................................................................................
**
** If an error (i.e. an OOM condition) occurs, return NULL and leave an 
** error code in the rbu handle passed as the first argument. Or, if an 
** error has already occurred when this function is called, return NULL 
** immediately without attempting the allocation or modifying the stored
** error code.
*/
static void *rbuMalloc(sqlite3rbu *p, int nByte){
  void *pRet = 0;
  if( p->rc==SQLITE_OK ){
    assert( nByte>0 );
    pRet = sqlite3_malloc64(nByte);
    if( pRet==0 ){
      p->rc = SQLITE_NOMEM;
    }else{
................................................................................

/*
** Allocate and zero the pIter->azTblCol[] and abTblPk[] arrays so that
** there is room for at least nCol elements. If an OOM occurs, store an
** error code in the RBU handle passed as the first argument.
*/
static void rbuAllocateIterArrays(sqlite3rbu *p, RbuObjIter *pIter, int nCol){
  int nByte = (2*sizeof(char*) + sizeof(int) + 3*sizeof(u8)) * nCol;
  char **azNew;

  azNew = (char**)rbuMalloc(p, nByte);
  if( azNew ){
    pIter->azTblCol = azNew;
    pIter->azTblType = &azNew[nCol];
    pIter->aiSrcOrder = (int*)&pIter->azTblType[nCol];
................................................................................
        sqlite3_mprintf("PRAGMA main.index_list = %Q", pIter->zTbl)
    );
  }

  pIter->nIndex = 0;
  while( p->rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pList) ){
    const char *zIdx = (const char*)sqlite3_column_text(pList, 1);

    sqlite3_stmt *pXInfo = 0;
    if( zIdx==0 ) break;



    p->rc = prepareFreeAndCollectError(p->dbMain, &pXInfo, &p->zErrmsg,
        sqlite3_mprintf("PRAGMA main.index_xinfo = %Q", zIdx)
    );
    while( p->rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pXInfo) ){
      int iCid = sqlite3_column_int(pXInfo, 1);
      if( iCid>=0 ) pIter->abIndexed[iCid] = 1;
    }
................................................................................
** string, an error code is left in the rbu handle passed as the first
** argument and NULL is returned. Or, if an error has already occurred
** when this function is called, NULL is returned immediately, without
** attempting the allocation or modifying the stored error code.
*/
static char *rbuObjIterGetBindlist(sqlite3rbu *p, int nBind){
  char *zRet = 0;
  int nByte = nBind*2 + 1;

  zRet = (char*)rbuMalloc(p, nByte);
  if( zRet ){
    int i;
    for(i=0; i<nBind; i++){
      zRet[i*2] = '?';
      zRet[i*2+1] = (i+1==nBind) ? '\0' : ',';
................................................................................
    rc = sqlite3_reset(p->objiter.pTmpInsert);
  }

  if( rc!=SQLITE_OK ){
    sqlite3_result_error_code(pCtx, rc);
  }
}

























































/*
** Ensure that the SQLite statement handles required to update the 
** target database object currently indicated by the iterator passed 
** as the second argument are available.
*/
static int rbuObjIterPrepareAll(
................................................................................

    if( zIdx ){
      const char *zTbl = pIter->zTbl;
      char *zImposterCols = 0;    /* Columns for imposter table */
      char *zImposterPK = 0;      /* Primary key declaration for imposter */
      char *zWhere = 0;           /* WHERE clause on PK columns */
      char *zBind = 0;

      int nBind = 0;

      assert( pIter->eType!=RBU_PK_VTAB );
      zCollist = rbuObjIterGetIndexCols(
          p, pIter, &zImposterCols, &zImposterPK, &zWhere, &nBind
      );
      zBind = rbuObjIterGetBindlist(p, nBind);


      /* Create the imposter table used to write to this index. */
      sqlite3_test_control(SQLITE_TESTCTRL_IMPOSTER, p->dbMain, "main", 0, 1);
      sqlite3_test_control(SQLITE_TESTCTRL_IMPOSTER, p->dbMain, "main", 1,tnum);
      rbuMPrintfExec(p, p->dbMain,
          "CREATE TABLE \"rbu_imp_%w\"( %s, PRIMARY KEY( %s ) ) WITHOUT ROWID",
          zTbl, zImposterCols, zImposterPK
................................................................................
      }

      /* Create the SELECT statement to read keys in sorted order */
      if( p->rc==SQLITE_OK ){
        char *zSql;
        if( rbuIsVacuum(p) ){
          zSql = sqlite3_mprintf(
              "SELECT %s, 0 AS rbu_control FROM '%q' ORDER BY %s%s",
              zCollist, 
              pIter->zDataTbl,
              zCollist, zLimit
          );
        }else

        if( pIter->eType==RBU_PK_EXTERNAL || pIter->eType==RBU_PK_NONE ){
          zSql = sqlite3_mprintf(
              "SELECT %s, rbu_control FROM %s.'rbu_tmp_%q' ORDER BY %s%s",
              zCollist, p->zStateDb, pIter->zDataTbl,
              zCollist, zLimit
          );
        }else{
          zSql = sqlite3_mprintf(
              "SELECT %s, rbu_control FROM %s.'rbu_tmp_%q' "
              "UNION ALL "
              "SELECT %s, rbu_control FROM '%q' "
              "WHERE typeof(rbu_control)='integer' AND rbu_control!=1 "
              "ORDER BY %s%s",
              zCollist, p->zStateDb, pIter->zDataTbl, 
              zCollist, pIter->zDataTbl, 


              zCollist, zLimit
          );
        }
        p->rc = prepareFreeAndCollectError(p->dbRbu, &pIter->pSelect, pz, zSql);
      }

      sqlite3_free(zImposterCols);
      sqlite3_free(zImposterPK);
      sqlite3_free(zWhere);
      sqlite3_free(zBind);

    }else{
      int bRbuRowid = (pIter->eType==RBU_PK_VTAB)
                    ||(pIter->eType==RBU_PK_NONE)
                    ||(pIter->eType==RBU_PK_EXTERNAL && rbuIsVacuum(p));
      const char *zTbl = pIter->zTbl;       /* Table this step applies to */
      const char *zWrite;                   /* Imposter table name */

................................................................................

  /* If not in RBU_STAGE_OAL, allow this call to pass through. Or, if this
  ** rbu is in the RBU_STAGE_OAL state, use heap memory for *-shm space 
  ** instead of a file on disk.  */
  assert( p->openFlags & (SQLITE_OPEN_MAIN_DB|SQLITE_OPEN_TEMP_DB) );
  if( eStage==RBU_STAGE_OAL || eStage==RBU_STAGE_MOVE ){
    if( iRegion<=p->nShm ){
      int nByte = (iRegion+1) * sizeof(char*);
      char **apNew = (char**)sqlite3_realloc64(p->apShm, nByte);
      if( apNew==0 ){
        rc = SQLITE_NOMEM;
      }else{
        memset(&apNew[p->nShm], 0, sizeof(char*) * (1 + iRegion - p->nShm));
        p->apShm = apNew;
        p->nShm = iRegion+1;
................................................................................
** Growing the hash table in this case is a performance optimization only,
** it is not required for correct operation.
*/
static int sessionGrowHash(int bPatchset, SessionTable *pTab){
  if( pTab->nChange==0 || pTab->nEntry>=(pTab->nChange/2) ){
    int i;
    SessionChange **apNew;
    int nNew = (pTab->nChange ? pTab->nChange : 128) * 2;

    apNew = (SessionChange **)sqlite3_malloc64(sizeof(SessionChange *) * nNew);
    if( apNew==0 ){
      if( pTab->nChange==0 ){
        return SQLITE_ERROR;
      }
      return SQLITE_OK;
................................................................................
/*
** Ensure that there is room in the buffer to append nByte bytes of data.
** If not, use sqlite3_realloc() to grow the buffer so that there is.
**
** If successful, return zero. Otherwise, if an OOM condition is encountered,
** set *pRc to SQLITE_NOMEM and return non-zero.
*/
static int sessionBufferGrow(SessionBuffer *p, int nByte, int *pRc){
  if( *pRc==SQLITE_OK && p->nAlloc-p->nBuf<nByte ){
    u8 *aNew;
    i64 nNew = p->nAlloc ? p->nAlloc : 128;
    do {
      nNew = nNew*2;
    }while( (nNew-p->nBuf)<nByte );

................................................................................
      sessionBufferGrow(&p->tblhdr, nByte, &rc);
    }else{
      rc = SQLITE_CORRUPT_BKPT;
    }
  }

  if( rc==SQLITE_OK ){
    int iPK = sizeof(sqlite3_value*)*p->nCol*2;
    memset(p->tblhdr.aBuf, 0, iPK);
    memcpy(&p->tblhdr.aBuf[iPK], &p->in.aData[p->in.iNext], nCopy);
    p->in.iNext += nCopy;
  }

  p->apValue = (sqlite3_value**)p->tblhdr.aBuf;
  p->abPK = (u8*)&p->apValue[p->nCol*2];
................................................................................
  while( pApply->constraints.nBuf ){
    sqlite3_changeset_iter *pIter2 = 0;
    SessionBuffer cons = pApply->constraints;
    memset(&pApply->constraints, 0, sizeof(SessionBuffer));

    rc = sessionChangesetStart(&pIter2, 0, 0, cons.nBuf, cons.aBuf, 0);
    if( rc==SQLITE_OK ){
      int nByte = 2*pApply->nCol*sizeof(sqlite3_value*);
      int rc2;
      pIter2->bPatchset = bPatchset;
      pIter2->zTab = (char*)zTab;
      pIter2->nCol = pApply->nCol;
      pIter2->abPK = pApply->abPK;
      sessionBufferGrow(&pIter2->tblhdr, nByte, &rc);
      pIter2->apValue = (sqlite3_value**)pIter2->tblhdr.aBuf;
................................................................................
  if( p->rc==SQLITE_OK && nLvl>=pWriter->nDlidx ){
    Fts5DlidxWriter *aDlidx = (Fts5DlidxWriter*)sqlite3_realloc64(
        pWriter->aDlidx, sizeof(Fts5DlidxWriter) * nLvl
    );
    if( aDlidx==0 ){
      p->rc = SQLITE_NOMEM;
    }else{
      int nByte = sizeof(Fts5DlidxWriter) * (nLvl - pWriter->nDlidx);
      memset(&aDlidx[pWriter->nDlidx], 0, nByte);
      pWriter->aDlidx = aDlidx;
      pWriter->nDlidx = nLvl;
    }
  }
  return p->rc;
}
................................................................................
  fts5_extension_function xFunc,  /* Aux. function implementation */
  void(*xDestroy)(void*)          /* Destructor for pUserData */
){
  Fts5Global *pGlobal = (Fts5Global*)pApi;
  int rc = sqlite3_overload_function(pGlobal->db, zName, -1);
  if( rc==SQLITE_OK ){
    Fts5Auxiliary *pAux;
    int nName;                      /* Size of zName in bytes, including \0 */
    int nByte;                      /* Bytes of space to allocate */

    nName = (int)strlen(zName) + 1;
    nByte = sizeof(Fts5Auxiliary) + nName;
    pAux = (Fts5Auxiliary*)sqlite3_malloc(nByte);
    if( pAux ){
      memset(pAux, 0, nByte);
      pAux->zFunc = (char*)&pAux[1];
      memcpy(pAux->zFunc, zName, nName);
      pAux->pGlobal = pGlobal;
      pAux->pUserData = pUserData;
      pAux->xFunc = xFunc;
      pAux->xDestroy = xDestroy;
      pAux->pNext = pGlobal->pAux;
................................................................................
  const char *zName,              /* Name of new function */
  void *pUserData,                /* User data for aux. function */
  fts5_tokenizer *pTokenizer,     /* Tokenizer implementation */
  void(*xDestroy)(void*)          /* Destructor for pUserData */
){
  Fts5Global *pGlobal = (Fts5Global*)pApi;
  Fts5TokenizerModule *pNew;
  int nName;                      /* Size of zName and its \0 terminator */
  int nByte;                      /* Bytes of space to allocate */
  int rc = SQLITE_OK;

  nName = (int)strlen(zName) + 1;
  nByte = sizeof(Fts5TokenizerModule) + nName;
  pNew = (Fts5TokenizerModule*)sqlite3_malloc(nByte);
  if( pNew ){
    memset(pNew, 0, nByte);
    pNew->zName = (char*)&pNew[1];
    memcpy(pNew->zName, zName, nName);
    pNew->pUserData = pUserData;
    pNew->x = *pTokenizer;
    pNew->xDestroy = xDestroy;
    pNew->pNext = pGlobal->pTok;
    pGlobal->pTok = pNew;
................................................................................
static void fts5SourceIdFunc(
  sqlite3_context *pCtx,          /* Function call context */
  int nArg,                       /* Number of args */
  sqlite3_value **apUnused        /* Function arguments */
){
  assert( nArg==0 );
  UNUSED_PARAM2(nArg, apUnused);
  sqlite3_result_text(pCtx, "fts5: 2019-04-10 18:29:40 f294cfc173c5653ef161dbff63b7838dbccdcad797f5163c49b3173f9f35ab0f", -1, SQLITE_TRANSIENT);
}

/*
** Return true if zName is the extension on one of the shadow tables used
** by this module.
*/
static int fts5ShadowName(const char *zName){
................................................................................
    if( p ){
      const char *zCat = "L* N* Co";
      int i;
      memset(p, 0, sizeof(Unicode61Tokenizer));

      p->eRemoveDiacritic = FTS5_REMOVE_DIACRITICS_SIMPLE;
      p->nFold = 64;
      p->aFold = sqlite3_malloc(p->nFold * sizeof(char));
      if( p->aFold==0 ){
        rc = SQLITE_NOMEM;
      }

      /* Search for a "categories" argument */
      for(i=0; rc==SQLITE_OK && i<nArg; i+=2){
        if( 0==sqlite3_stricmp(azArg[i], "categories") ){
................................................................................
#endif
  return rc;
}
#endif /* SQLITE_CORE */
#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_STMTVTAB) */

/************** End of stmt.c ************************************************/
#if __LINE__!=222788
#undef SQLITE_SOURCE_ID
#define SQLITE_SOURCE_ID      "2019-04-10 18:29:40 f294cfc173c5653ef161dbff63b7838dbccdcad797f5163c49b3173f9f35alt2"
#endif
/* Return the source-id for this library */
SQLITE_API const char *sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; }
/************************** End of sqlite3.c ******************************/

**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.28.0"
#define SQLITE_VERSION_NUMBER 3028000
#define SQLITE_SOURCE_ID      "2019-04-16 19:49:53 884b4b7e502b4e991677b53971277adfaf0a04a284f8e483e2553d0f83156b50"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
................................................................................
** the hash table.
*/
struct Hash {
  unsigned int htsize;      /* Number of buckets in the hash table */
  unsigned int count;       /* Number of entries in this table */
  HashElem *first;          /* The first element of the array */
  struct _ht {              /* the hash table */
    unsigned int count;        /* Number of entries with this hash */
    HashElem *chain;           /* Pointer to first entry with this hash */
  } *ht;
};

/* Each element in the hash table is an instance of the following 
** structure.  All elements are stored on a single doubly-linked list.
**
................................................................................
#ifndef SQLITE_OMIT_UTF16
/*
** This routine transforms the internal text encoding used by pMem to
** desiredEnc. It is an error if the string is already of the desired
** encoding, or if *pMem does not contain a string value.
*/
SQLITE_PRIVATE SQLITE_NOINLINE int sqlite3VdbeMemTranslate(Mem *pMem, u8 desiredEnc){
  sqlite3_int64 len;          /* Maximum length of output string in bytes */
  unsigned char *zOut;        /* Output buffer */
  unsigned char *zIn;         /* Input iterator */
  unsigned char *zTerm;       /* End of input */
  unsigned char *z;           /* Output iterator */
  unsigned int c;

  assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
  assert( pMem->flags&MEM_Str );
  assert( pMem->enc!=desiredEnc );
  assert( pMem->enc!=0 );
  assert( pMem->n>=0 );
................................................................................
  if( desiredEnc==SQLITE_UTF8 ){
    /* When converting from UTF-16, the maximum growth results from
    ** translating a 2-byte character to a 4-byte UTF-8 character.
    ** A single byte is required for the output string
    ** nul-terminator.
    */
    pMem->n &= ~1;
    len = 2 * (sqlite3_int64)pMem->n + 1;
  }else{
    /* When converting from UTF-8 to UTF-16 the maximum growth is caused
    ** when a 1-byte UTF-8 character is translated into a 2-byte UTF-16
    ** character. Two bytes are required in the output buffer for the
    ** nul-terminator.
    */
    len = 2 * (sqlite3_int64)pMem->n + 2;
  }

  /* Set zIn to point at the start of the input buffer and zTerm to point 1
  ** byte past the end.
  **
  ** Variable zOut is set to point at the output buffer, space obtained
  ** from sqlite3_malloc().
................................................................................
  char *z;               /* Pointer to where zName will be stored */
  int i;                 /* Index in pIn[] where zName is stored */

  nInt = nName/4 + 3;
  assert( pIn==0 || pIn[0]>=3 );  /* Verify ok to add new elements */
  if( pIn==0 || pIn[1]+nInt > pIn[0] ){
    /* Enlarge the allocation */
    sqlite3_int64 nAlloc = (pIn ? 2*(sqlite3_int64)pIn[0] : 10) + nInt;
    VList *pOut = sqlite3DbRealloc(db, pIn, nAlloc*sizeof(int));
    if( pOut==0 ) return pIn;
    if( pIn==0 ) pOut[1] = 2;
    pIn = pOut;
    pIn[0] = nAlloc;
  }
  i = pIn[1];
................................................................................
*/
static HashElem *findElementWithHash(
  const Hash *pH,     /* The pH to be searched */
  const char *pKey,   /* The key we are searching for */
  unsigned int *pHash /* Write the hash value here */
){
  HashElem *elem;                /* Used to loop thru the element list */
  unsigned int count;            /* Number of elements left to test */
  unsigned int h;                /* The computed hash */
  static HashElem nullElement = { 0, 0, 0, 0 };

  if( pH->ht ){   /*OPTIMIZATION-IF-TRUE*/
    struct _ht *pEntry;
    h = strHash(pKey) % pH->htsize;
    pEntry = &pH->ht[h];
................................................................................
    elem->next->prev = elem->prev;
  }
  if( pH->ht ){
    pEntry = &pH->ht[h];
    if( pEntry->chain==elem ){
      pEntry->chain = elem->next;
    }
    assert( pEntry->count>0 );
    pEntry->count--;
  }
  sqlite3_free( elem );
  pH->count--;
  if( pH->count==0 ){
    assert( pH->first==0 );
    assert( pH->count==0 );
    sqlite3HashClear(pH);
................................................................................

/*
** Malloc function used by SQLite to obtain space from the buffer configured
** using sqlite3_config(SQLITE_CONFIG_PAGECACHE) option. If no such buffer
** exists, this function falls back to sqlite3Malloc().
*/
SQLITE_PRIVATE void *sqlite3PageMalloc(int sz){
  assert( sz<=65536+8 ); /* These allocations are never very large */


  return pcache1Alloc(sz);
}

/*
** Free an allocated buffer obtained from sqlite3PageMalloc().
*/
SQLITE_PRIVATE void sqlite3PageFree(void *p){
................................................................................
  int iPage,               /* The page we seek */
  volatile u32 **ppPage    /* Write the page pointer here */
){
  int rc = SQLITE_OK;

  /* Enlarge the pWal->apWiData[] array if required */
  if( pWal->nWiData<=iPage ){
    sqlite3_int64 nByte = sizeof(u32*)*(iPage+1);
    volatile u32 **apNew;
    apNew = (volatile u32 **)sqlite3_realloc64((void *)pWal->apWiData, nByte);
    if( !apNew ){
      *ppPage = 0;
      return SQLITE_NOMEM_BKPT;
    }
    memset((void*)&apNew[pWal->nWiData], 0,
................................................................................
    s2 = aIn[1];
  }else{
    s1 = s2 = 0;
  }

  assert( nByte>=8 );
  assert( (nByte&0x00000007)==0 );
  assert( nByte<=65536 );

  if( nativeCksum ){
    do {
      s1 += *aData++ + s2;
      s2 += *aData++ + s1;
    }while( aData<aEnd );
  }else{
................................................................................
** The calling routine should invoke walIteratorFree() to destroy the
** WalIterator object when it has finished with it.
*/
static int walIteratorInit(Wal *pWal, u32 nBackfill, WalIterator **pp){
  WalIterator *p;                 /* Return value */
  int nSegment;                   /* Number of segments to merge */
  u32 iLast;                      /* Last frame in log */
  sqlite3_int64 nByte;            /* Number of bytes to allocate */
  int i;                          /* Iterator variable */
  ht_slot *aTmp;                  /* Temp space used by merge-sort */
  int rc = SQLITE_OK;             /* Return Code */

  /* This routine only runs while holding the checkpoint lock. And
  ** it only runs if there is actually content in the log (mxFrame>0).
  */
................................................................................
  ** more frequent reallocs and hence provide more opportunities for 
  ** simulated OOM faults.  SQLITE_TEST_REALLOC_STRESS is generally used
  ** during testing only.  With SQLITE_TEST_REALLOC_STRESS grow the op array
  ** by the minimum* amount required until the size reaches 512.  Normal
  ** operation (without SQLITE_TEST_REALLOC_STRESS) is to double the current
  ** size of the op array or add 1KB of space, whichever is smaller. */
#ifdef SQLITE_TEST_REALLOC_STRESS
  sqlite3_int64 nNew = (v->nOpAlloc>=512 ? 2*(sqlite3_int64)v->nOpAlloc
                        : (sqlite3_int64)v->nOpAlloc+nOp);
#else
  sqlite3_int64 nNew = (v->nOpAlloc ? 2*(sqlite3_int64)v->nOpAlloc
                        : (sqlite3_int64)(1024/sizeof(Op)));
  UNUSED_PARAMETER(nOp);
#endif

  /* Ensure that the size of a VDBE does not grow too large */
  if( nNew > p->db->aLimit[SQLITE_LIMIT_VDBE_OP] ){
    sqlite3OomFault(p->db);
    return SQLITE_NOMEM;
................................................................................
  Vdbe *p,                        /* VM to add scanstatus() to */
  int addrExplain,                /* Address of OP_Explain (or 0) */
  int addrLoop,                   /* Address of loop counter */ 
  int addrVisit,                  /* Address of rows visited counter */
  LogEst nEst,                    /* Estimated number of output rows */
  const char *zName               /* Name of table or index being scanned */
){
  sqlite3_int64 nByte = (p->nScan+1) * sizeof(ScanStatus);
  ScanStatus *aNew;
  aNew = (ScanStatus*)sqlite3DbRealloc(p->db, p->aScan, nByte);
  if( aNew ){
    ScanStatus *pNew = &aNew[p->nScan++];
    pNew->addrExplain = addrExplain;
    pNew->addrLoop = addrLoop;
    pNew->addrVisit = addrVisit;
................................................................................
#endif /* !SQLITE_OMIT_TRACE && SQLITE_ENABLE_IOTRACE */

/* An instance of this object describes bulk memory available for use
** by subcomponents of a prepared statement.  Space is allocated out
** of a ReusableSpace object by the allocSpace() routine below.
*/
struct ReusableSpace {
  u8 *pSpace;            /* Available memory */
  sqlite3_int64 nFree;   /* Bytes of available memory */
  sqlite3_int64 nNeeded; /* Total bytes that could not be allocated */
};

/* Try to allocate nByte bytes of 8-byte aligned bulk memory for pBuf
** from the ReusableSpace object.  Return a pointer to the allocated
** memory on success.  If insufficient memory is available in the
** ReusableSpace object, increase the ReusableSpace.nNeeded
** value by the amount needed and return NULL.
................................................................................
** This allocator is employed to repurpose unused slots at the end of the
** opcode array of prepared state for other memory needs of the prepared
** statement.
*/
static void *allocSpace(
  struct ReusableSpace *p,  /* Bulk memory available for allocation */
  void *pBuf,               /* Pointer to a prior allocation */
  sqlite3_int64 nByte       /* Bytes of memory needed */
){
  assert( EIGHT_BYTE_ALIGNMENT(p->pSpace) );
  if( pBuf==0 ){
    nByte = ROUND8(nByte);
    if( nByte <= p->nFree ){
      p->nFree -= nByte;
      pBuf = &p->pSpace[p->nFree];
................................................................................
  sqlite3_int64 iElapse;
  assert( p->startTime>0 );
  assert( (db->mTrace & (SQLITE_TRACE_PROFILE|SQLITE_TRACE_XPROFILE))!=0 );
  assert( db->init.busy==0 );
  assert( p->zSql!=0 );
  sqlite3OsCurrentTimeInt64(db->pVfs, &iNow);
  iElapse = (iNow - p->startTime)*1000000;
#ifndef SQLITE_OMIT_DEPRECATED
  if( db->xProfile ){
    db->xProfile(db->pProfileArg, p->zSql, iElapse);
  }
#endif
  if( db->mTrace & SQLITE_TRACE_PROFILE ){
    db->xTrace(SQLITE_TRACE_PROFILE, db->pTraceArg, p, (void*)&iElapse);
  }
................................................................................
    ** In this case, allocate space at p->aAlloc[] to copy the requested
    ** range into. Then return a copy of pointer p->aAlloc to the caller.  */
    int nRem;                     /* Bytes remaining to copy */

    /* Extend the p->aAlloc[] allocation if required. */
    if( p->nAlloc<nByte ){
      u8 *aNew;
      sqlite3_int64 nNew = MAX(128, 2*(sqlite3_int64)p->nAlloc);
      while( nByte>nNew ) nNew = nNew*2;
      aNew = sqlite3Realloc(p->aAlloc, nNew);
      if( !aNew ) return SQLITE_NOMEM_BKPT;
      p->nAlloc = nNew;
      p->aAlloc = aNew;
    }

................................................................................
  }

  if( pSorter->list.aMemory ){
    int nMin = pSorter->iMemory + nReq;

    if( nMin>pSorter->nMemory ){
      u8 *aNew;
      sqlite3_int64 nNew = 2 * (sqlite3_int64)pSorter->nMemory;
      int iListOff = -1;
      if( pSorter->list.pList ){
        iListOff = (u8*)pSorter->list.pList - pSorter->list.aMemory;

      }
      while( nNew < nMin ) nNew = nNew*2;
      if( nNew > pSorter->mxPmaSize ) nNew = pSorter->mxPmaSize;
      if( nNew < nMin ) nNew = nMin;

      aNew = sqlite3Realloc(pSorter->list.aMemory, nNew);
      if( !aNew ) return SQLITE_NOMEM_BKPT;
      if( iListOff>=0 ){
        pSorter->list.pList = (SorterRecord*)&aNew[iListOff];
      }
      pSorter->list.aMemory = aNew;
      pSorter->nMemory = nNew;
    }

    pNew = (SorterRecord*)&pSorter->list.aMemory[pSorter->iMemory];
    pSorter->iMemory += ROUND8(nReq);
    if( pSorter->list.pList ){
................................................................................
** argument. If an OOM condition is encountered, NULL is returned
** and the db->mallocFailed flag set.
*/
#ifndef SQLITE_OMIT_CTE
static With *withDup(sqlite3 *db, With *p){
  With *pRet = 0;
  if( p ){
    sqlite3_int64 nByte = sizeof(*p) + sizeof(p->a[0]) * (p->nCte-1);
    pRet = sqlite3DbMallocZero(db, nByte);
    if( pRet ){
      int i;
      pRet->nCte = p->nCte;
      for(i=0; i<p->nCte; i++){
        pRet->a[i].pSelect = sqlite3SelectDup(db, p->a[i].pSelect, 0);
        pRet->a[i].pCols = sqlite3ExprListDup(db, p->a[i].pCols, 0);
................................................................................
    if( pList==0 ){
      goto no_mem;
    }
    pList->nExpr = 0;
  }else if( (pList->nExpr & (pList->nExpr-1))==0 ){
    ExprList *pNew;
    pNew = sqlite3DbRealloc(db, pList, 
         sizeof(*pList)+(2*(sqlite3_int64)pList->nExpr-1)*sizeof(pList->a[0]));
    if( pNew==0 ){
      goto no_mem;
    }
    pList = pNew;
  }
  pItem = &pList->a[pList->nExpr++];
  assert( offsetof(struct ExprList_item,zName)==sizeof(pItem->pExpr) );
................................................................................
    if( !REOPEN_AS_MEMDB(db) ){
      rc = sqlite3Init(db, &zErrDyn);
    }
    sqlite3BtreeLeaveAll(db);
    assert( zErrDyn==0 || rc!=SQLITE_OK );
  }
#ifdef SQLITE_USER_AUTHENTICATION
  if( rc==SQLITE_OK && !REOPEN_AS_MEMDB(db) ){
    u8 newAuth = 0;
    rc = sqlite3UserAuthCheckLogin(db, zName, &newAuth);
    if( newAuth<db->auth.authLevel ){
      rc = SQLITE_AUTH_USER;
    }
  }
#endif
................................................................................
  sqlite3 *db,      /* Connection to notify of malloc failures */
  void *pArray,     /* Array of objects.  Might be reallocated */
  int szEntry,      /* Size of each object in the array */
  int *pnEntry,     /* Number of objects currently in use */
  int *pIdx         /* Write the index of a new slot here */
){
  char *z;
  sqlite3_int64 n = *pIdx = *pnEntry;
  if( (n & (n-1))==0 ){
    sqlite3_int64 sz = (n==0) ? 1 : 2*n;
    void *pNew = sqlite3DbRealloc(db, pArray, sz*szEntry);
    if( pNew==0 ){
      *pIdx = -1;
      return pArray;
    }
    pArray = pNew;
  }
  z = (char*)pArray;
  memset(&z[n * szEntry], 0, szEntry);

  ++*pnEntry;
  return pArray;
}

/*
** Append a new element to the given IdList.  Create a new IdList if
** need be.
................................................................................
  assert( nExtra>=1 );
  assert( pSrc!=0 );
  assert( iStart<=pSrc->nSrc );

  /* Allocate additional space if needed */
  if( (u32)pSrc->nSrc+nExtra>pSrc->nAlloc ){
    SrcList *pNew;
    sqlite3_int64 nAlloc = 2*(sqlite3_int64)pSrc->nSrc+nExtra;
    sqlite3 *db = pParse->db;

    if( pSrc->nSrc+nExtra>=SQLITE_MAX_SRCLIST ){
      sqlite3ErrorMsg(pParse, "too many FROM clause terms, max: %d",
                      SQLITE_MAX_SRCLIST);
      return 0;
    }
................................................................................
      if( sqlite3StrICmp(zName, pWith->a[i].zName)==0 ){
        sqlite3ErrorMsg(pParse, "duplicate WITH table name: %s", zName);
      }
    }
  }

  if( pWith ){
    sqlite3_int64 nByte = sizeof(*pWith) + (sizeof(pWith->a[1]) * pWith->nCte);
    pNew = sqlite3DbRealloc(db, pWith, nByte);
  }else{
    pNew = sqlite3DbMallocZero(db, sizeof(*pWith));
  }
  assert( (pNew!=0 && zName!=0) || db->mallocFailed );

  if( db->mallocFailed ){
................................................................................

/*
** Add a new module argument to pTable->azModuleArg[].
** The string is not copied - the pointer is stored.  The
** string will be freed automatically when the table is
** deleted.
*/
static void addModuleArgument(Parse *pParse, Table *pTable, char *zArg){
  sqlite3_int64 nBytes = sizeof(char *)*(2+pTable->nModuleArg);
  char **azModuleArg;
  sqlite3 *db = pParse->db;
  if( pTable->nModuleArg+3>=db->aLimit[SQLITE_LIMIT_COLUMN] ){
    sqlite3ErrorMsg(pParse, "too many columns on %s", pTable->zName);
  }
  azModuleArg = sqlite3DbRealloc(db, pTable->azModuleArg, nBytes);
  if( azModuleArg==0 ){
    sqlite3DbFree(db, zArg);
  }else{
    int i = pTable->nModuleArg++;
    azModuleArg[i] = zArg;
    azModuleArg[i+1] = 0;
................................................................................
  pTable = pParse->pNewTable;
  if( pTable==0 ) return;
  assert( 0==pTable->pIndex );

  db = pParse->db;

  assert( pTable->nModuleArg==0 );
  addModuleArgument(pParse, pTable, sqlite3NameFromToken(db, pModuleName));
  addModuleArgument(pParse, pTable, 0);
  addModuleArgument(pParse, pTable, sqlite3DbStrDup(db, pTable->zName));
  assert( (pParse->sNameToken.z==pName2->z && pName2->z!=0)
       || (pParse->sNameToken.z==pName1->z && pName2->z==0)
  );
  pParse->sNameToken.n = (int)(
      &pModuleName->z[pModuleName->n] - pParse->sNameToken.z
  );

................................................................................
** virtual table currently under construction in pParse->pTable.
*/
static void addArgumentToVtab(Parse *pParse){
  if( pParse->sArg.z && pParse->pNewTable ){
    const char *z = (const char*)pParse->sArg.z;
    int n = pParse->sArg.n;
    sqlite3 *db = pParse->db;
    addModuleArgument(pParse, pParse->pNewTable, sqlite3DbStrNDup(db, z, n));
  }
}

/*
** The parser calls this routine after the CREATE VIRTUAL TABLE statement
** has been completely parsed.
*/
................................................................................
*/
static int growVTrans(sqlite3 *db){
  const int ARRAY_INCR = 5;

  /* Grow the sqlite3.aVTrans array if required */
  if( (db->nVTrans%ARRAY_INCR)==0 ){
    VTable **aVTrans;
    sqlite3_int64 nBytes = sizeof(sqlite3_vtab*)*
                                 ((sqlite3_int64)db->nVTrans + ARRAY_INCR);
    aVTrans = sqlite3DbRealloc(db, (void *)db->aVTrans, nBytes);
    if( !aVTrans ){
      return SQLITE_NOMEM_BKPT;
    }
    memset(&aVTrans[db->nVTrans], 0, sizeof(sqlite3_vtab *)*ARRAY_INCR);
    db->aVTrans = aVTrans;
  }
................................................................................
    return 0;
  }
  pMod->pEpoTab = pTab;
  pTab->nTabRef = 1;
  pTab->pSchema = db->aDb[0].pSchema;
  assert( pTab->nModuleArg==0 );
  pTab->iPKey = -1;
  addModuleArgument(pParse, pTab, sqlite3DbStrDup(db, pTab->zName));
  addModuleArgument(pParse, pTab, 0);
  addModuleArgument(pParse, pTab, sqlite3DbStrDup(db, pTab->zName));
  rc = vtabCallConstructor(db, pTab, pMod, pModule->xConnect, &zErr);
  if( rc ){
    sqlite3ErrorMsg(pParse, "%s", zErr);
    sqlite3DbFree(db, zErr);
    sqlite3VtabEponymousTableClear(db, pMod);
    return 0;
  }
................................................................................
  if( sz<=(int)sizeof(LookasideSlot*) ) sz = 0;
  if( cnt<0 ) cnt = 0;
  if( sz==0 || cnt==0 ){
    sz = 0;
    pStart = 0;
  }else if( pBuf==0 ){
    sqlite3BeginBenignMalloc();
    pStart = sqlite3Malloc( sz*(sqlite3_int64)cnt );  /* IMP: R-61949-35727 */
    sqlite3EndBenignMalloc();
    if( pStart ) cnt = sqlite3MallocSize(pStart)/sz;
  }else{
    pStart = pBuf;
  }
  db->lookaside.pStart = pStart;
  db->lookaside.pInit = 0;
................................................................................
    sqlite3Fts3ErrMsg(pzErr, "unknown tokenizer: %s", z);
    rc = SQLITE_ERROR;
  }else{
    char const **aArg = 0;
    int iArg = 0;
    z = &z[n+1];
    while( z<zEnd && (NULL!=(z = (char *)sqlite3Fts3NextToken(z, &n))) ){
      sqlite3_int64 nNew = sizeof(char *)*(iArg+1);
      char const **aNew = (const char **)sqlite3_realloc64((void *)aArg, nNew);
      if( !aNew ){
        sqlite3_free(zCopy);
        sqlite3_free((void *)aArg);
        return SQLITE_NOMEM;
      }
      aArg = aNew;
      aArg[iArg++] = z;
................................................................................
  UNUSED_PARAMETER(idxStr);
  UNUSED_PARAMETER(nVal);

  fts3tokResetCursor(pCsr);
  if( idxNum==1 ){
    const char *zByte = (const char *)sqlite3_value_text(apVal[0]);
    int nByte = sqlite3_value_bytes(apVal[0]);
    pCsr->zInput = sqlite3_malloc64(nByte+1);
    if( pCsr->zInput==0 ){
      rc = SQLITE_NOMEM;
    }else{
      memcpy(pCsr->zInput, zByte, nByte);
      pCsr->zInput[nByte] = 0;
      rc = pTab->pMod->xOpen(pTab->pTok, pCsr->zInput, nByte, &pCsr->pCsr);
      if( rc==SQLITE_OK ){
................................................................................
    if( pE ){
      aElem = &pE;
      nElem = 1;
    }
  }

  if( nElem>0 ){
    sqlite3_int64 nByte;
    nByte = sizeof(Fts3SegReader) + (nElem+1)*sizeof(Fts3HashElem *);
    pReader = (Fts3SegReader *)sqlite3_malloc64(nByte);
    if( !pReader ){
      rc = SQLITE_NOMEM;
    }else{
      memset(pReader, 0, nByte);
      pReader->iIdx = 0x7FFFFFFF;
      pReader->ppNextElem = (Fts3HashElem **)&pReader[1];
      memcpy(pReader->ppNextElem, aElem, nElem*sizeof(Fts3HashElem *));
................................................................................
){
  char *pBlob;             /* The BLOB encoding of the document size */
  int nBlob;               /* Number of bytes in the BLOB */
  sqlite3_stmt *pStmt;     /* Statement used to insert the encoding */
  int rc;                  /* Result code from subfunctions */

  if( *pRC ) return;
  pBlob = sqlite3_malloc64( 10*(sqlite3_int64)p->nColumn );
  if( pBlob==0 ){
    *pRC = SQLITE_NOMEM;
    return;
  }
  fts3EncodeIntArray(p->nColumn, aSz, pBlob, &nBlob);
  rc = fts3SqlStmt(p, SQL_REPLACE_DOCSIZE, &pStmt, 0);
  if( rc ){
................................................................................
  sqlite3_stmt *pStmt;     /* Statement for reading and writing */
  int i;                   /* Loop counter */
  int rc;                  /* Result code from subfunctions */

  const int nStat = p->nColumn+2;

  if( *pRC ) return;
  a = sqlite3_malloc64( (sizeof(u32)+10)*(sqlite3_int64)nStat );
  if( a==0 ){
    *pRC = SQLITE_NOMEM;
    return;
  }
  pBlob = (char*)&a[nStat];
  rc = fts3SqlStmt(p, SQL_SELECT_STAT, &pStmt, 0);
  if( rc ){
................................................................................
      rc = SQLITE_NOMEM;
    }else{
      rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0);
      sqlite3_free(zSql);
    }

    if( rc==SQLITE_OK ){
      sqlite3_int64 nByte = sizeof(u32) * ((sqlite3_int64)p->nColumn+1)*3;
      aSz = (u32 *)sqlite3_malloc64(nByte);
      if( aSz==0 ){
        rc = SQLITE_NOMEM;
      }else{
        memset(aSz, 0, nByte);
        aSzIns = &aSz[p->nColumn+1];
        aSzDel = &aSzIns[p->nColumn+1];
      }
................................................................................
  Fts3Table *p,                   /* FTS3 table handle */
  sqlite3_int64 iAbsLevel,        /* Absolute level to open */
  int nSeg,                       /* Number of segments to merge */
  Fts3MultiSegReader *pCsr        /* Cursor object to populate */
){
  int rc;                         /* Return Code */
  sqlite3_stmt *pStmt = 0;        /* Statement used to read %_segdir entry */  
  sqlite3_int64 nByte;            /* Bytes allocated at pCsr->apSegment[] */

  /* Allocate space for the Fts3MultiSegReader.aCsr[] array */
  memset(pCsr, 0, sizeof(*pCsr));
  nByte = sizeof(Fts3SegReader *) * nSeg;
  pCsr->apSegment = (Fts3SegReader **)sqlite3_malloc64(nByte);

  if( pCsr->apSegment==0 ){
    rc = SQLITE_NOMEM;
  }else{
    memset(pCsr->apSegment, 0, nByte);
    rc = fts3SqlStmt(p, SQL_SELECT_LEVEL, &pStmt, 0);
  }
................................................................................

  if( nArg>1 && sqlite3_value_int(apVal[2 + p->nColumn + 2])<0 ){
    rc = SQLITE_CONSTRAINT;
    goto update_out;
  }

  /* Allocate space to hold the change in document sizes */
  aSzDel = sqlite3_malloc64(sizeof(aSzDel[0])*((sqlite3_int64)p->nColumn+1)*2);
  if( aSzDel==0 ){
    rc = SQLITE_NOMEM;
    goto update_out;
  }
  aSzIns = &aSzDel[p->nColumn+1];
  memset(aSzDel, 0, sizeof(aSzDel[0])*(p->nColumn+1)*2);

................................................................................
/*************************************************************************
** Start of MatchinfoBuffer code.
*/

/*
** Allocate a two-slot MatchinfoBuffer object.
*/
static MatchinfoBuffer *fts3MIBufferNew(size_t nElem, const char *zMatchinfo){
  MatchinfoBuffer *pRet;
  sqlite3_int64 nByte = sizeof(u32) * (2*(sqlite3_int64)nElem + 1)
                           + sizeof(MatchinfoBuffer);
  sqlite3_int64 nStr = strlen(zMatchinfo);

  pRet = sqlite3_malloc64(nByte + nStr+1);
  if( pRet ){
    memset(pRet, 0, nByte);
    pRet->aMatchinfo[0] = (u8*)(&pRet->aMatchinfo[1]) - (u8*)pRet;
    pRet->aMatchinfo[1+nElem] = pRet->aMatchinfo[0]
                                      + sizeof(u32)*((int)nElem+1);
    pRet->nElem = (int)nElem;
    pRet->zMatchinfo = ((char*)pRet) + nByte;
    memcpy(pRet->zMatchinfo, zMatchinfo, nStr+1);
    pRet->aRef[0] = 1;
  }

  return pRet;
}
................................................................................
  ){
    return SQLITE_OK;
  }
  sqlite3Fts3ErrMsg(pzErr, "unrecognized matchinfo request: %c", cArg);
  return SQLITE_ERROR;
}

static size_t fts3MatchinfoSize(MatchInfo *pInfo, char cArg){
  size_t nVal;                      /* Number of integers output by cArg */

  switch( cArg ){
    case FTS3_MATCHINFO_NDOC:
    case FTS3_MATCHINFO_NPHRASE: 
    case FTS3_MATCHINFO_NCOL: 
      nVal = 1;
      break;
................................................................................
        if( rc==SQLITE_OK ){
          rc = fts3MatchinfoLcs(pCsr, pInfo);
        }
        break;

      case FTS3_MATCHINFO_LHITS_BM:
      case FTS3_MATCHINFO_LHITS: {
        size_t nZero = fts3MatchinfoSize(pInfo, zArg[i]) * sizeof(u32);
        memset(pInfo->aMatchinfo, 0, nZero);
        rc = fts3ExprLHitGather(pCsr->pExpr, pInfo);
        break;
      }

      default: {
        Fts3Expr *pExpr;
................................................................................

  /* If Fts3Cursor.pMIBuffer is NULL, then this is the first time the
  ** matchinfo function has been called for this query. In this case 
  ** allocate the array used to accumulate the matchinfo data and
  ** initialize those elements that are constant for every row.
  */
  if( pCsr->pMIBuffer==0 ){
    size_t nMatchinfo = 0;        /* Number of u32 elements in match-info */
    int i;                        /* Used to iterate through zArg */

    /* Determine the number of phrases in the query */
    pCsr->nPhrase = fts3ExprPhraseCount(pCsr->pExpr);
    sInfo.nPhrase = pCsr->nPhrase;

    /* Determine the number of integers in the buffer returned by this call. */
................................................................................
     && s.a[0]==s.a[s.nVertex*2-2]
     && s.a[1]==s.a[s.nVertex*2-1]
     && (s.z++, geopolySkipSpace(&s)==0)
    ){
      GeoPoly *pOut;
      int x = 1;
      s.nVertex--;  /* Remove the redundant vertex at the end */
      pOut = sqlite3_malloc64( GEOPOLY_SZ((sqlite3_int64)s.nVertex) );
      x = 1;
      if( pOut==0 ) goto parse_json_err;
      pOut->nVertex = s.nVertex;
      memcpy(pOut->a, s.a, s.nVertex*2*sizeof(GeoCoord));
      pOut->hdr[0] = *(unsigned char*)&x;
      pOut->hdr[1] = (s.nVertex>>16)&0xff;
      pOut->hdr[2] = (s.nVertex>>8)&0xff;
................................................................................
      r = GeoY(p,ii);
      if( r<mnY ) mnY = (float)r;
      else if( r>mxY ) mxY = (float)r;
    }
    if( pRc ) *pRc = SQLITE_OK;
    if( aCoord==0 ){
      geopolyBboxFill:
      pOut = sqlite3_realloc64(p, GEOPOLY_SZ(4));
      if( pOut==0 ){
        sqlite3_free(p);
        if( context ) sqlite3_result_error_nomem(context);
        if( pRc ) *pRc = SQLITE_NOMEM;
        return 0;
      }
      pOut->nVertex = 4;
................................................................................
  return p;
}

/*
** Determine the overlap between two polygons
*/
static int geopolyOverlap(GeoPoly *p1, GeoPoly *p2){
  sqlite3_int64 nVertex = p1->nVertex + p2->nVertex + 2;
  GeoOverlap *p;
  sqlite3_int64 nByte;
  GeoEvent *pThisEvent;
  double rX;
  int rc = 0;
  int needSort = 0;
  GeoSegment *pActive = 0;
  GeoSegment *pSeg;
  unsigned char aOverlap[4];

  nByte = sizeof(GeoEvent)*nVertex*2 
           + sizeof(GeoSegment)*nVertex 
           + sizeof(GeoOverlap);
  p = sqlite3_malloc64( nByte );
  if( p==0 ) return -1;
  p->aEvent = (GeoEvent*)&p[1];
  p->aSegment = (GeoSegment*)&p->aEvent[nVertex*2];
  p->nEvent = p->nSegment = 0;
  geopolyAddSegments(p, p1, 1);
  geopolyAddSegments(p, p2, 2);
  pThisEvent = geopolySortEventsByX(p->aEvent, p->nEvent);
................................................................................
  int argc, const char *const*argv,   /* Parameters to CREATE TABLE statement */
  sqlite3_vtab **ppVtab,              /* OUT: New virtual table */
  char **pzErr,                       /* OUT: Error message, if any */
  int isCreate                        /* True for xCreate, false for xConnect */
){
  int rc = SQLITE_OK;
  Rtree *pRtree;
  sqlite3_int64 nDb;              /* Length of string argv[1] */
  sqlite3_int64 nName;            /* Length of string argv[2] */
  sqlite3_str *pSql;
  char *zSql;
  int ii;

  sqlite3_vtab_config(db, SQLITE_VTAB_CONSTRAINT_SUPPORT, 1);

  /* Allocate the sqlite3_vtab structure */
  nDb = strlen(argv[1]);
  nName = strlen(argv[2]);
  pRtree = (Rtree *)sqlite3_malloc64(sizeof(Rtree)+nDb+nName+2);
  if( !pRtree ){
    return SQLITE_NOMEM;
  }
  memset(pRtree, 0, sizeof(Rtree)+nDb+nName+2);
  pRtree->nBusy = 1;
  pRtree->base.pModule = &rtreeModule;
  pRtree->zDb = (char *)&pRtree[1];
................................................................................
**     * a special "cleanup table" state.
**
** abIndexed:
**   If the table has no indexes on it, abIndexed is set to NULL. Otherwise,
**   it points to an array of flags nTblCol elements in size. The flag is
**   set for each column that is either a part of the PK or a part of an
**   index. Or clear otherwise.
**
**   If there are one or more partial indexes on the table, all fields of
**   this array set set to 1. This is because in that case, the module has
**   no way to tell which fields will be required to add and remove entries
**   from the partial indexes.
**   
*/
struct RbuObjIter {
  sqlite3_stmt *pTblIter;         /* Iterate through tables */
  sqlite3_stmt *pIdxIter;         /* Index iterator */
  int nTblCol;                    /* Size of azTblCol[] array */
  char **azTblCol;                /* Array of unquoted target column names */
................................................................................
**
** If an error (i.e. an OOM condition) occurs, return NULL and leave an 
** error code in the rbu handle passed as the first argument. Or, if an 
** error has already occurred when this function is called, return NULL 
** immediately without attempting the allocation or modifying the stored
** error code.
*/
static void *rbuMalloc(sqlite3rbu *p, sqlite3_int64 nByte){
  void *pRet = 0;
  if( p->rc==SQLITE_OK ){
    assert( nByte>0 );
    pRet = sqlite3_malloc64(nByte);
    if( pRet==0 ){
      p->rc = SQLITE_NOMEM;
    }else{
................................................................................

/*
** Allocate and zero the pIter->azTblCol[] and abTblPk[] arrays so that
** there is room for at least nCol elements. If an OOM occurs, store an
** error code in the RBU handle passed as the first argument.
*/
static void rbuAllocateIterArrays(sqlite3rbu *p, RbuObjIter *pIter, int nCol){
  sqlite3_int64 nByte = (2*sizeof(char*) + sizeof(int) + 3*sizeof(u8)) * nCol;
  char **azNew;

  azNew = (char**)rbuMalloc(p, nByte);
  if( azNew ){
    pIter->azTblCol = azNew;
    pIter->azTblType = &azNew[nCol];
    pIter->aiSrcOrder = (int*)&pIter->azTblType[nCol];
................................................................................
        sqlite3_mprintf("PRAGMA main.index_list = %Q", pIter->zTbl)
    );
  }

  pIter->nIndex = 0;
  while( p->rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pList) ){
    const char *zIdx = (const char*)sqlite3_column_text(pList, 1);
    int bPartial = sqlite3_column_int(pList, 4);
    sqlite3_stmt *pXInfo = 0;
    if( zIdx==0 ) break;
    if( bPartial ){
      memset(pIter->abIndexed, 0x01, sizeof(u8)*pIter->nTblCol);
    }
    p->rc = prepareFreeAndCollectError(p->dbMain, &pXInfo, &p->zErrmsg,
        sqlite3_mprintf("PRAGMA main.index_xinfo = %Q", zIdx)
    );
    while( p->rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pXInfo) ){
      int iCid = sqlite3_column_int(pXInfo, 1);
      if( iCid>=0 ) pIter->abIndexed[iCid] = 1;
    }
................................................................................
** string, an error code is left in the rbu handle passed as the first
** argument and NULL is returned. Or, if an error has already occurred
** when this function is called, NULL is returned immediately, without
** attempting the allocation or modifying the stored error code.
*/
static char *rbuObjIterGetBindlist(sqlite3rbu *p, int nBind){
  char *zRet = 0;
  sqlite3_int64 nByte = 2*(sqlite3_int64)nBind + 1;

  zRet = (char*)rbuMalloc(p, nByte);
  if( zRet ){
    int i;
    for(i=0; i<nBind; i++){
      zRet[i*2] = '?';
      zRet[i*2+1] = (i+1==nBind) ? '\0' : ',';
................................................................................
    rc = sqlite3_reset(p->objiter.pTmpInsert);
  }

  if( rc!=SQLITE_OK ){
    sqlite3_result_error_code(pCtx, rc);
  }
}

static char *rbuObjIterGetIndexWhere(sqlite3rbu *p, RbuObjIter *pIter){
  sqlite3_stmt *pStmt = 0;
  int rc = p->rc;
  char *zRet = 0;

  if( rc==SQLITE_OK ){
    rc = prepareAndCollectError(p->dbMain, &pStmt, &p->zErrmsg,
        "SELECT trim(sql) FROM sqlite_master WHERE type='index' AND name=?"
    );
  }
  if( rc==SQLITE_OK ){
    int rc2;
    rc = sqlite3_bind_text(pStmt, 1, pIter->zIdx, -1, SQLITE_STATIC);
    if( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pStmt) ){
      const char *zSql = (const char*)sqlite3_column_text(pStmt, 0);
      if( zSql ){
        int nParen = 0;           /* Number of open parenthesis */
        int i;
        for(i=0; zSql[i]; i++){
          char c = zSql[i];
          if( c=='(' ){
            nParen++;
          }
          else if( c==')' ){
            nParen--;
            if( nParen==0 ){
              i++;
              break;
            }
          }else if( c=='"' || c=='\'' || c=='`' ){
            for(i++; 1; i++){
              if( zSql[i]==c ){
                if( zSql[i+1]!=c ) break;
                i++;
              }
            }
          }else if( c=='[' ){
            for(i++; 1; i++){
              if( zSql[i]==']' ) break;
            }
          }
        }
        if( zSql[i] ){
          zRet = rbuStrndup(&zSql[i], &rc);
        }
      }
    }

    rc2 = sqlite3_finalize(pStmt);
    if( rc==SQLITE_OK ) rc = rc2;
  }

  p->rc = rc;
  return zRet;
}

/*
** Ensure that the SQLite statement handles required to update the 
** target database object currently indicated by the iterator passed 
** as the second argument are available.
*/
static int rbuObjIterPrepareAll(
................................................................................

    if( zIdx ){
      const char *zTbl = pIter->zTbl;
      char *zImposterCols = 0;    /* Columns for imposter table */
      char *zImposterPK = 0;      /* Primary key declaration for imposter */
      char *zWhere = 0;           /* WHERE clause on PK columns */
      char *zBind = 0;
      char *zPart = 0;
      int nBind = 0;

      assert( pIter->eType!=RBU_PK_VTAB );
      zCollist = rbuObjIterGetIndexCols(
          p, pIter, &zImposterCols, &zImposterPK, &zWhere, &nBind
      );
      zBind = rbuObjIterGetBindlist(p, nBind);
      zPart = rbuObjIterGetIndexWhere(p, pIter);

      /* Create the imposter table used to write to this index. */
      sqlite3_test_control(SQLITE_TESTCTRL_IMPOSTER, p->dbMain, "main", 0, 1);
      sqlite3_test_control(SQLITE_TESTCTRL_IMPOSTER, p->dbMain, "main", 1,tnum);
      rbuMPrintfExec(p, p->dbMain,
          "CREATE TABLE \"rbu_imp_%w\"( %s, PRIMARY KEY( %s ) ) WITHOUT ROWID",
          zTbl, zImposterCols, zImposterPK
................................................................................
      }

      /* Create the SELECT statement to read keys in sorted order */
      if( p->rc==SQLITE_OK ){
        char *zSql;
        if( rbuIsVacuum(p) ){
          zSql = sqlite3_mprintf(
              "SELECT %s, 0 AS rbu_control FROM '%q' %s ORDER BY %s%s",
              zCollist, 
              pIter->zDataTbl,
              zPart, zCollist, zLimit
          );
        }else

        if( pIter->eType==RBU_PK_EXTERNAL || pIter->eType==RBU_PK_NONE ){
          zSql = sqlite3_mprintf(
              "SELECT %s, rbu_control FROM %s.'rbu_tmp_%q' %s ORDER BY %s%s",
              zCollist, p->zStateDb, pIter->zDataTbl,
              zPart, zCollist, zLimit
          );
        }else{
          zSql = sqlite3_mprintf(
              "SELECT %s, rbu_control FROM %s.'rbu_tmp_%q' %s "
              "UNION ALL "
              "SELECT %s, rbu_control FROM '%q' "
              "%s %s typeof(rbu_control)='integer' AND rbu_control!=1 "
              "ORDER BY %s%s",
              zCollist, p->zStateDb, pIter->zDataTbl, zPart,
              zCollist, pIter->zDataTbl, 
              zPart,
              (zPart ? "AND" : "WHERE"),
              zCollist, zLimit
          );
        }
        p->rc = prepareFreeAndCollectError(p->dbRbu, &pIter->pSelect, pz, zSql);
      }

      sqlite3_free(zImposterCols);
      sqlite3_free(zImposterPK);
      sqlite3_free(zWhere);
      sqlite3_free(zBind);
      sqlite3_free(zPart);
    }else{
      int bRbuRowid = (pIter->eType==RBU_PK_VTAB)
                    ||(pIter->eType==RBU_PK_NONE)
                    ||(pIter->eType==RBU_PK_EXTERNAL && rbuIsVacuum(p));
      const char *zTbl = pIter->zTbl;       /* Table this step applies to */
      const char *zWrite;                   /* Imposter table name */

................................................................................

  /* If not in RBU_STAGE_OAL, allow this call to pass through. Or, if this
  ** rbu is in the RBU_STAGE_OAL state, use heap memory for *-shm space 
  ** instead of a file on disk.  */
  assert( p->openFlags & (SQLITE_OPEN_MAIN_DB|SQLITE_OPEN_TEMP_DB) );
  if( eStage==RBU_STAGE_OAL || eStage==RBU_STAGE_MOVE ){
    if( iRegion<=p->nShm ){
      sqlite3_int64 nByte = (iRegion+1) * sizeof(char*);
      char **apNew = (char**)sqlite3_realloc64(p->apShm, nByte);
      if( apNew==0 ){
        rc = SQLITE_NOMEM;
      }else{
        memset(&apNew[p->nShm], 0, sizeof(char*) * (1 + iRegion - p->nShm));
        p->apShm = apNew;
        p->nShm = iRegion+1;
................................................................................
** Growing the hash table in this case is a performance optimization only,
** it is not required for correct operation.
*/
static int sessionGrowHash(int bPatchset, SessionTable *pTab){
  if( pTab->nChange==0 || pTab->nEntry>=(pTab->nChange/2) ){
    int i;
    SessionChange **apNew;
    sqlite3_int64 nNew = 2*(sqlite3_int64)(pTab->nChange ? pTab->nChange : 128);

    apNew = (SessionChange **)sqlite3_malloc64(sizeof(SessionChange *) * nNew);
    if( apNew==0 ){
      if( pTab->nChange==0 ){
        return SQLITE_ERROR;
      }
      return SQLITE_OK;
................................................................................
/*
** Ensure that there is room in the buffer to append nByte bytes of data.
** If not, use sqlite3_realloc() to grow the buffer so that there is.
**
** If successful, return zero. Otherwise, if an OOM condition is encountered,
** set *pRc to SQLITE_NOMEM and return non-zero.
*/
static int sessionBufferGrow(SessionBuffer *p, size_t nByte, int *pRc){
  if( *pRc==SQLITE_OK && p->nAlloc-p->nBuf<nByte ){
    u8 *aNew;
    i64 nNew = p->nAlloc ? p->nAlloc : 128;
    do {
      nNew = nNew*2;
    }while( (nNew-p->nBuf)<nByte );

................................................................................
      sessionBufferGrow(&p->tblhdr, nByte, &rc);
    }else{
      rc = SQLITE_CORRUPT_BKPT;
    }
  }

  if( rc==SQLITE_OK ){
    size_t iPK = sizeof(sqlite3_value*)*p->nCol*2;
    memset(p->tblhdr.aBuf, 0, iPK);
    memcpy(&p->tblhdr.aBuf[iPK], &p->in.aData[p->in.iNext], nCopy);
    p->in.iNext += nCopy;
  }

  p->apValue = (sqlite3_value**)p->tblhdr.aBuf;
  p->abPK = (u8*)&p->apValue[p->nCol*2];
................................................................................
  while( pApply->constraints.nBuf ){
    sqlite3_changeset_iter *pIter2 = 0;
    SessionBuffer cons = pApply->constraints;
    memset(&pApply->constraints, 0, sizeof(SessionBuffer));

    rc = sessionChangesetStart(&pIter2, 0, 0, cons.nBuf, cons.aBuf, 0);
    if( rc==SQLITE_OK ){
      size_t nByte = 2*pApply->nCol*sizeof(sqlite3_value*);
      int rc2;
      pIter2->bPatchset = bPatchset;
      pIter2->zTab = (char*)zTab;
      pIter2->nCol = pApply->nCol;
      pIter2->abPK = pApply->abPK;
      sessionBufferGrow(&pIter2->tblhdr, nByte, &rc);
      pIter2->apValue = (sqlite3_value**)pIter2->tblhdr.aBuf;
................................................................................
  if( p->rc==SQLITE_OK && nLvl>=pWriter->nDlidx ){
    Fts5DlidxWriter *aDlidx = (Fts5DlidxWriter*)sqlite3_realloc64(
        pWriter->aDlidx, sizeof(Fts5DlidxWriter) * nLvl
    );
    if( aDlidx==0 ){
      p->rc = SQLITE_NOMEM;
    }else{
      size_t nByte = sizeof(Fts5DlidxWriter) * (nLvl - pWriter->nDlidx);
      memset(&aDlidx[pWriter->nDlidx], 0, nByte);
      pWriter->aDlidx = aDlidx;
      pWriter->nDlidx = nLvl;
    }
  }
  return p->rc;
}
................................................................................
  fts5_extension_function xFunc,  /* Aux. function implementation */
  void(*xDestroy)(void*)          /* Destructor for pUserData */
){
  Fts5Global *pGlobal = (Fts5Global*)pApi;
  int rc = sqlite3_overload_function(pGlobal->db, zName, -1);
  if( rc==SQLITE_OK ){
    Fts5Auxiliary *pAux;
    sqlite3_int64 nName;            /* Size of zName in bytes, including \0 */
    sqlite3_int64 nByte;            /* Bytes of space to allocate */

    nName = strlen(zName) + 1;
    nByte = sizeof(Fts5Auxiliary) + nName;
    pAux = (Fts5Auxiliary*)sqlite3_malloc64(nByte);
    if( pAux ){
      memset(pAux, 0, (size_t)nByte);
      pAux->zFunc = (char*)&pAux[1];
      memcpy(pAux->zFunc, zName, nName);
      pAux->pGlobal = pGlobal;
      pAux->pUserData = pUserData;
      pAux->xFunc = xFunc;
      pAux->xDestroy = xDestroy;
      pAux->pNext = pGlobal->pAux;
................................................................................
  const char *zName,              /* Name of new function */
  void *pUserData,                /* User data for aux. function */
  fts5_tokenizer *pTokenizer,     /* Tokenizer implementation */
  void(*xDestroy)(void*)          /* Destructor for pUserData */
){
  Fts5Global *pGlobal = (Fts5Global*)pApi;
  Fts5TokenizerModule *pNew;
  sqlite3_int64 nName;            /* Size of zName and its \0 terminator */
  sqlite3_int64 nByte;            /* Bytes of space to allocate */
  int rc = SQLITE_OK;

  nName = strlen(zName) + 1;
  nByte = sizeof(Fts5TokenizerModule) + nName;
  pNew = (Fts5TokenizerModule*)sqlite3_malloc64(nByte);
  if( pNew ){
    memset(pNew, 0, (size_t)nByte);
    pNew->zName = (char*)&pNew[1];
    memcpy(pNew->zName, zName, nName);
    pNew->pUserData = pUserData;
    pNew->x = *pTokenizer;
    pNew->xDestroy = xDestroy;
    pNew->pNext = pGlobal->pTok;
    pGlobal->pTok = pNew;
................................................................................
static void fts5SourceIdFunc(
  sqlite3_context *pCtx,          /* Function call context */
  int nArg,                       /* Number of args */
  sqlite3_value **apUnused        /* Function arguments */
){
  assert( nArg==0 );
  UNUSED_PARAM2(nArg, apUnused);
  sqlite3_result_text(pCtx, "fts5: 2019-04-16 19:49:53 884b4b7e502b4e991677b53971277adfaf0a04a284f8e483e2553d0f83156b50", -1, SQLITE_TRANSIENT);
}

/*
** Return true if zName is the extension on one of the shadow tables used
** by this module.
*/
static int fts5ShadowName(const char *zName){
................................................................................
    if( p ){
      const char *zCat = "L* N* Co";
      int i;
      memset(p, 0, sizeof(Unicode61Tokenizer));

      p->eRemoveDiacritic = FTS5_REMOVE_DIACRITICS_SIMPLE;
      p->nFold = 64;
      p->aFold = sqlite3_malloc64(p->nFold * sizeof(char));
      if( p->aFold==0 ){
        rc = SQLITE_NOMEM;
      }

      /* Search for a "categories" argument */
      for(i=0; rc==SQLITE_OK && i<nArg; i+=2){
        if( 0==sqlite3_stricmp(azArg[i], "categories") ){
................................................................................
#endif
  return rc;
}
#endif /* SQLITE_CORE */
#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_STMTVTAB) */

/************** End of stmt.c ************************************************/
#if __LINE__!=222870
#undef SQLITE_SOURCE_ID
#define SQLITE_SOURCE_ID      "2019-04-16 19:49:53 884b4b7e502b4e991677b53971277adfaf0a04a284f8e483e2553d0f8315alt2"
#endif
/* Return the source-id for this library */
SQLITE_API const char *sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; }
/************************** End of sqlite3.c ******************************/

**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.28.0"
#define SQLITE_VERSION_NUMBER 3028000
#define SQLITE_SOURCE_ID      "2019-04-10 18:29:40 f294cfc173c5653ef161dbff63b7838dbccdcad797f5163c49b3173f9f35ab0f"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros

**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.28.0"
#define SQLITE_VERSION_NUMBER 3028000
#define SQLITE_SOURCE_ID      "2019-04-16 19:49:53 884b4b7e502b4e991677b53971277adfaf0a04a284f8e483e2553d0f83156b50"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros