/*
** Copyright (c) 2018 D. Richard Hipp
**
** This program is free software; you can redistribute it and/or
** modify it under the terms of the Simplified BSD License (also
** known as the "2-Clause License" or "FreeBSD License".)
**
** This program is distributed in the hope that it will be useful,
** but without any warranty; without even the implied warranty of
** merchantability or fitness for a particular purpose.
**
** Author contact information:
** drh@hwaci.com
** http://www.hwaci.com/drh/
**
*******************************************************************************
**
** This file contains code used to manage a background processes that
** occur after user interaction with the repository. Examples of
** backoffice processing includes:
**
** * Sending alerts and notifications
** * Processing the email queue
** * Handling post-receive hooks
** * Automatically syncing to peer repositories
**
** Backoffice processing is automatically started whenever there are
** changes to the repository. The backoffice process dies off after
** a period of inactivity.
**
** Steps are taken to ensure that only a single backoffice process is
** running at a time. Otherwise, there could be race conditions that
** cause adverse effects such as multiple alerts for the same changes.
**
** At the same time, we do not want a backoffice process to run forever.
** Backoffice processes should die off after doing whatever work they need
** to do. In this way, we avoid having lots of idle processes in the
** process table, doing nothing on rarely accessed repositories, and
** if the Fossil binary is updated on a system, the backoffice processes
** will restart using the new binary automatically.
**
** At any point in time there should be at most two backoffice processes.
** There is a main process that is doing the actually work, and there is
** a second stand-by process that is waiting for the main process to finish
** and that will become the main process after a delay.
**
** After any successful web page reply, the backoffice_check_if_needed()
** routine is called. That routine checks to see if both one or both of
** the backoffice processes are already running. That routine remembers the
** status in a global variable.
**
** Later, after the repository database is closed, the
** backoffice_run_if_needed() routine is called. If the prior call
** to backoffice_check_if_needed() indicated that backoffice processing
** might be required, the run_if_needed() attempts to kick off a backoffice
** process.
**
** All work performance by the backoffice is in the backoffice_work()
** routine.
*/
#if defined(_WIN32)
# if defined(_WIN32_WINNT)
# undef _WIN32_WINNT
# endif
# define _WIN32_WINNT 0x501
#endif
#include "config.h"
#include "backoffice.h"
#include <time.h>
#if defined(_WIN32)
# include <windows.h>
# include <stdio.h>
# include <process.h>
# if defined(__MINGW32__)
# include <wchar.h>
# endif
# define GETPID (int)GetCurrentProcessId
#else
# include <unistd.h>
# include <sys/types.h>
# include <signal.h>
# include <errno.h>
# include <sys/time.h>
# include <sys/resource.h>
# include <fcntl.h>
# define GETPID getpid
#endif
#include <time.h>
/*
** The BKOFCE_LEASE_TIME is the amount of time for which a single backoffice
** processing run is valid. Each backoffice run monopolizes the lease for
** at least this amount of time. Hopefully all backoffice processing is
** finished much faster than this - usually in less than a second. But
** regardless of how long each invocation lasts, successive backoffice runs
** must be spaced out by at least this much time.
*/
#define BKOFCE_LEASE_TIME 60 /* Length of lease validity in seconds */
#if LOCAL_INTERFACE
/*
** An instance of the following object describes a lease on the backoffice
** processing timeslot. This lease is used to help ensure that no more than
** one process is running backoffice at a time.
*/
struct Lease {
sqlite3_uint64 idCurrent; /* process ID for the current lease holder */
sqlite3_uint64 tmCurrent; /* Expiration of the current lease */
sqlite3_uint64 idNext; /* process ID for the next lease holder on queue */
sqlite3_uint64 tmNext; /* Expiration of the next lease */
};
#endif
/***************************************************************************
** Local state variables
**
** Set to prevent backoffice processing from ever entering sleep or
** otherwise taking a long time to complete. Set this when a user-visible
** process might need to wait for backoffice to complete.
*/
static int backofficeNoDelay = 0;
/* This variable is set to the name of a database on which backoffice
** should run if backoffice process is needed. It is set by the
** backoffice_check_if_needed() routine which must be run while the database
** file is open. Later, after the database is closed, the
** backoffice_run_if_needed() will consult this variable to see if it
** should be a no-op.
**
** The magic string "x" in this variable means "do not run the backoffice".
*/
static char *backofficeDb = 0;
/*
** Log backoffice activity to a file named here. If not NULL, this
** overrides the "backoffice-logfile" setting of the database. If NULL,
** the "backoffice-logfile" setting is used instead.
*/
static const char *backofficeLogfile = 0;
/*
** Write the log message into this open file.
*/
static FILE *backofficeFILE = 0;
/*
** Write backoffice log messages on this BLOB. to this connection:
*/
static Blob *backofficeBlob = 0;
/*
** Non-zero for extra logging detail.
*/
static int backofficeLogDetail = 0;
/* End of state variables
****************************************************************************/
/*
** This function emits a diagnostic message related to the processing in
** this module.
*/
#if defined(_WIN32)
# define BKOFCE_ALWAYS_TRACE (1)
extern void sqlite3_win32_write_debug(const char *, int);
#else
# define BKOFCE_ALWAYS_TRACE (0)
#endif
static void backofficeTrace(const char *zFormat, ...){
char *zMsg = 0;
if( BKOFCE_ALWAYS_TRACE || g.fAnyTrace ){
va_list ap;
va_start(ap, zFormat);
zMsg = sqlite3_vmprintf(zFormat, ap);
va_end(ap);
#if defined(_WIN32)
sqlite3_win32_write_debug(zMsg, -1);
#endif
}
if( g.fAnyTrace ) fprintf(stderr, "%s", zMsg);
if( zMsg ) sqlite3_free(zMsg);
}
/*
** Do not allow backoffice processes to sleep waiting on a timeslot.
** They must either do their work immediately or exit.
**
** In a perfect world, this interface would not exist, as there would
** never be a problem with waiting backoffice threads. But in some cases
** a backoffice will delay a UI thread, so we don't want them to run for
** longer than needed.
*/
void backoffice_no_delay(void){
backofficeNoDelay = 1;
}
/*
** Sleeps for the specified number of milliseconds -OR- until interrupted
** by another thread (if supported by the underlying platform). Non-zero
** will be returned if the sleep was interrupted.
*/
static int backofficeSleep(int milliseconds){
#if defined(_WIN32)
assert( milliseconds>=0 );
if( SleepEx((DWORD)milliseconds, TRUE)==WAIT_IO_COMPLETION ){
return 1;
}
#else
sqlite3_sleep(milliseconds);
#endif
return 0;
}
/*
** Parse a unsigned 64-bit integer from a string. Return a pointer
** to the character of z[] that occurs after the integer.
*/
static const char *backofficeParseInt(const char *z, sqlite3_uint64 *pVal){
*pVal = 0;
if( z==0 ) return 0;
while( fossil_isspace(z[0]) ){ z++; }
while( fossil_isdigit(z[0]) ){
*pVal = (*pVal)*10 + z[0] - '0';
z++;
}
return z;
}
/*
** Read the "backoffice" property and parse it into a Lease object.
**
** The backoffice property should consist of four integers:
**
** (1) Process ID for the active backoffice process.
** (2) Time (seconds since 1970) for when the active backoffice
** lease expires.
** (3) Process ID for the on-deck backoffice process.
** (4) Time when the on-deck process should expire.
**
** No other process should start active backoffice processing until
** process (1) no longer exists and the current time exceeds (2).
*/
static void backofficeReadLease(Lease *pLease){
Stmt q;
memset(pLease, 0, sizeof(*pLease));
db_unprotect(PROTECT_CONFIG);
db_prepare(&q, "SELECT value FROM repository.config"
" WHERE name='backoffice'");
if( db_step(&q)==SQLITE_ROW ){
const char *z = db_column_text(&q,0);
z = backofficeParseInt(z, &pLease->idCurrent);
z = backofficeParseInt(z, &pLease->tmCurrent);
z = backofficeParseInt(z, &pLease->idNext);
backofficeParseInt(z, &pLease->tmNext);
}
db_finalize(&q);
db_protect_pop();
}
/*
** Return a string that describes how long it has been since the
** last backoffice run. The string is obtained from fossil_malloc().
*/
char *backoffice_last_run(void){
Lease x;
sqlite3_uint64 tmNow;
double rAge;
backofficeReadLease(&x);
tmNow = time(0);
if( x.tmCurrent==0 ){
return fossil_strdup("never");
}
if( tmNow<=(x.tmCurrent-BKOFCE_LEASE_TIME) ){
return fossil_strdup("moments ago");
}
rAge = (tmNow - (x.tmCurrent-BKOFCE_LEASE_TIME))/86400.0;
return mprintf("%z ago", human_readable_age(rAge));
}
/*
** Write a lease to the backoffice property
*/
static void backofficeWriteLease(Lease *pLease){
db_unprotect(PROTECT_CONFIG);
db_multi_exec(
"REPLACE INTO repository.config(name,value,mtime)"
" VALUES('backoffice','%lld %lld %lld %lld',now())",
pLease->idCurrent, pLease->tmCurrent,
pLease->idNext, pLease->tmNext);
db_protect_pop();
}
/*
** Check to see if the specified Win32 process is still alive. It
** should be noted that even if this function returns non-zero, the
** process may die before another operation on it can be completed.
*/
#if defined(_WIN32)
#ifndef PROCESS_QUERY_LIMITED_INFORMATION
# define PROCESS_QUERY_LIMITED_INFORMATION (0x1000)
#endif
static int backofficeWin32ProcessExists(DWORD dwProcessId){
HANDLE hProcess;
hProcess = OpenProcess(PROCESS_QUERY_LIMITED_INFORMATION,FALSE,dwProcessId);
if( hProcess==NULL ) return 0;
CloseHandle(hProcess);
return 1;
}
#endif
/*
** Check to see if the process identified by pid is alive. If
** we cannot prove that the process is dead, return true.
*/
static int backofficeProcessExists(sqlite3_uint64 pid){
#if defined(_WIN32)
return pid>0 && backofficeWin32ProcessExists((DWORD)pid)!=0;
#else
return pid>0 && kill((pid_t)pid, 0)==0;
#endif
}
/*
** Check to see if the process identified by pid has finished. If
** we cannot prove that the process is still running, return true.
*/
static int backofficeProcessDone(sqlite3_uint64 pid){
#if defined(_WIN32)
return pid<=0 || backofficeWin32ProcessExists((DWORD)pid)==0;
#else
return pid<=0 || kill((pid_t)pid, 0)!=0;
#endif
}
/*
** Return a process id number for the current process
*/
static sqlite3_uint64 backofficeProcessId(void){
return (sqlite3_uint64)GETPID();
}
/*
** COMMAND: test-process-id
**
** Usage: %fossil [--sleep N] PROCESS-ID ...
**
** Show the current process id, and also tell whether or not all other
** processes IDs on the command line are running or not. If the --sleep N
** option is provide, then sleep for N seconds before exiting.
*/
void test_process_id_command(void){
const char *zSleep = find_option("sleep",0,1);
int i;
verify_all_options();
fossil_print("ProcessID for this process: %lld\n", backofficeProcessId());
if( zSleep ) sqlite3_sleep(1000*atoi(zSleep));
for(i=2; i<g.argc; i++){
sqlite3_uint64 x = (sqlite3_uint64)atoi(g.argv[i]);
fossil_print("ProcessId %lld: exists %d done %d\n",
x, backofficeProcessExists(x),
backofficeProcessDone(x));
}
}
/*
** COMMAND: test-backoffice-lease
**
** Usage: %fossil test-backoffice-lease ?--reset?
**
** Print out information about the backoffice "lease" entry in the
** config table that controls whether or not backoffice should run.
**
** If the --reset option is given, the backoffice lease is reset.
** The use of the --reset option can be disruptive. It can cause two
** or more backoffice processes to be run simultaneously. Use it with
** caution.
*/
void test_backoffice_lease(void){
sqlite3_int64 tmNow = time(0);
Lease x;
const char *zLease;
db_find_and_open_repository(0,0);
if( find_option("reset",0,0)!=0 ){
db_unprotect(PROTECT_CONFIG);
db_multi_exec(
"DELETE FROM repository.config WHERE name='backoffice'"
);
db_protect_pop();
}
verify_all_options();
zLease = db_get("backoffice","");
fossil_print("now: %lld\n", tmNow);
fossil_print("lease: \"%s\"\n", zLease);
backofficeReadLease(&x);
fossil_print("idCurrent: %-20lld", x.idCurrent);
if( backofficeProcessExists(x.idCurrent) ) fossil_print(" (exists)");
if( backofficeProcessDone(x.idCurrent) ) fossil_print(" (done)");
fossil_print("\n");
fossil_print("tmCurrent: %-20lld", x.tmCurrent);
if( x.tmCurrent>0 ){
fossil_print(" (now%+d)\n",x.tmCurrent-tmNow);
}else{
fossil_print("\n");
}
fossil_print("idNext: %-20lld", x.idNext);
if( backofficeProcessExists(x.idNext) ) fossil_print(" (exists)");
if( backofficeProcessDone(x.idNext) ) fossil_print(" (done)");
fossil_print("\n");
fossil_print("tmNext: %-20lld", x.tmNext);
if( x.tmNext>0 ){
fossil_print(" (now%+d)\n",x.tmNext-tmNow);
}else{
fossil_print("\n");
}
}
/*
** If backoffice processing is needed set the backofficeDb variable to the
** name of the database file. If no backoffice processing is needed,
** this routine makes no changes to state.
*/
void backoffice_check_if_needed(void){
Lease x;
sqlite3_uint64 tmNow;
if( backofficeDb ) return;
if( g.zRepositoryName==0 ) return;
if( g.db==0 ) return;
if( !db_table_exists("repository","config") ) return;
if( db_get_boolean("backoffice-disable",0) ) return;
tmNow = time(0);
backofficeReadLease(&x);
if( x.tmNext>=tmNow && backofficeProcessExists(x.idNext) ){
/* Another backoffice process is already queued up to run. This
** process does not need to do any backoffice work. */
return;
}else{
/* We need to run backup to be (at a minimum) on-deck */
backofficeDb = fossil_strdup(g.zRepositoryName);
}
}
/*
** Call this routine to disable backoffice
*/
void backoffice_disable(void){
backofficeDb = "x";
}
/*
** Check for errors prior to running backoffice_thread() or backoffice_run().
*/
static void backoffice_error_check_one(int *pOnce){
if( *pOnce ){
fossil_panic("multiple calls to backoffice()");
}
*pOnce = 1;
if( g.db==0 ){
fossil_panic("database not open for backoffice processing");
}
if( db_transaction_nesting_depth()!=0 ){
fossil_panic("transaction %s not closed prior to backoffice processing",
db_transaction_start_point());
}
}
/* This is the main loop for backoffice processing.
**
** If another process is already working as the current backoffice and
** the on-deck backoffice, then this routine returns very quickly
** without doing any work.
**
** If no backoffice processes are running at all, this routine becomes
** the main backoffice.
**
** If a primary backoffice is running, but an on-deck backoffice is
** needed, this routine becomes that on-deck backoffice.
*/
static void backoffice_thread(void){
Lease x;
sqlite3_uint64 tmNow;
sqlite3_uint64 idSelf;
int lastWarning = 0;
int warningDelay = 30;
static int once = 0;
if( sqlite3_db_readonly(g.db, 0) ) return;
if( db_is_protected(PROTECT_READONLY) ) return;
g.zPhase = "backoffice";
backoffice_error_check_one(&once);
idSelf = backofficeProcessId();
while(1){
tmNow = time(0);
db_begin_write();
backofficeReadLease(&x);
if( x.tmNext>=tmNow
&& x.idNext!=idSelf
&& backofficeProcessExists(x.idNext)
){
/* Another backoffice process is already queued up to run. This
** process does not need to do any backoffice work and can stop
** immediately. */
db_end_transaction(0);
backofficeTrace("/***** Backoffice Processing Not Needed In %d *****/\n",
GETPID());
break;
}
if( x.tmCurrent<tmNow && backofficeProcessDone(x.idCurrent) ){
/* This process can start doing backoffice work immediately */
x.idCurrent = idSelf;
x.tmCurrent = tmNow + BKOFCE_LEASE_TIME;
x.idNext = 0;
x.tmNext = 0;
backofficeWriteLease(&x);
db_end_transaction(0);
backofficeTrace("/***** Begin Backoffice Processing %d *****/\n",
GETPID());
backoffice_work();
break;
}
if( backofficeNoDelay || db_get_boolean("backoffice-nodelay",0) ){
/* If the no-delay flag is set, exit immediately rather than queuing
** up. Assume that some future request will come along and handle any
** necessary backoffice work. */
db_end_transaction(0);
backofficeTrace(
"/***** Backoffice No-Delay Exit For %d *****/\n",
GETPID());
break;
}
/* This process needs to queue up and wait for the current lease
** to expire before continuing. */
x.idNext = idSelf;
x.tmNext = (tmNow>x.tmCurrent ? tmNow : x.tmCurrent) + BKOFCE_LEASE_TIME;
backofficeWriteLease(&x);
db_end_transaction(0);
backofficeTrace("/***** Backoffice On-deck %d *****/\n", GETPID());
if( x.tmCurrent >= tmNow ){
if( backofficeSleep(1000*(x.tmCurrent - tmNow + 1)) ){
/* The sleep was interrupted by a signal from another thread. */
backofficeTrace("/***** Backoffice Interrupt %d *****/\n", GETPID());
db_end_transaction(0);
break;
}
}else{
if( (sqlite3_uint64)(lastWarning+warningDelay) < tmNow ){
fossil_warning(
"backoffice process %lld still running after %d seconds",
x.idCurrent, (int)(BKOFCE_LEASE_TIME + tmNow - x.tmCurrent));
lastWarning = tmNow;
warningDelay *= 2;
}
if( backofficeSleep(1000) ){
/* The sleep was interrupted by a signal from another thread. */
backofficeTrace("/***** Backoffice Interrupt %d *****/\n", GETPID());
db_end_transaction(0);
break;
}
}
}
return;
}
/*
** Append to a message to the backoffice log, if the log is open.
*/
void backoffice_log(const char *zFormat, ...){
va_list ap;
if( backofficeBlob==0 ) return;
blob_append_char(backofficeBlob, ' ');
va_start(ap, zFormat);
blob_vappendf(backofficeBlob, zFormat, ap);
va_end(ap);
}
#if !defined(_WIN32)
/*
** Capture routine for signals while running backoffice.
*/
static void backoffice_signal_handler(int sig){
const char *zSig = 0;
if( sig==SIGSEGV ) zSig = "SIGSEGV";
if( sig==SIGFPE ) zSig = "SIGFPE";
if( sig==SIGABRT ) zSig = "SIGABRT";
if( sig==SIGILL ) zSig = "SIGILL";
if( zSig==0 ){
backoffice_log("signal-%d", sig);
}else{
backoffice_log("%s", zSig);
}
fprintf(backofficeFILE, "%s\n", blob_str(backofficeBlob));
fflush(backofficeFILE);
exit(1);
}
#endif
#if !defined(_WIN32)
/*
** Convert a struct timeval into an integer number of microseconds
*/
static long long int tvms(struct timeval *p){
return ((long long int)p->tv_sec)*1000000 + (long long int)p->tv_usec;
}
#endif
/*
** This routine runs to do the backoffice processing. When adding new
** backoffice processing tasks, add them here.
*/
void backoffice_work(void){
/* Log the backoffice run for testing purposes. For production deployments
** the "backoffice-logfile" property should be unset and the following code
** should be a no-op. */
const char *zLog = backofficeLogfile;
Blob log;
int nThis;
int nTotal = 0;
#if !defined(_WIN32)
struct timeval sStart, sEnd;
#endif
if( zLog==0 ) zLog = db_get("backoffice-logfile",0);
if( zLog && zLog[0] && (backofficeFILE = fossil_fopen(zLog,"a"))!=0 ){
int i;
char *zName = db_get("project-name",0);
#if !defined(_WIN32)
gettimeofday(&sStart, 0);
signal(SIGSEGV, backoffice_signal_handler);
signal(SIGABRT, backoffice_signal_handler);
signal(SIGFPE, backoffice_signal_handler);
signal(SIGILL, backoffice_signal_handler);
#endif
if( zName==0 ){
zName = (char*)file_tail(g.zRepositoryName);
if( zName==0 ) zName = "(unnamed)";
}else{
/* Convert all spaces in the "project-name" into dashes */
for(i=0; zName[i]; i++){ if( zName[i]==' ' ) zName[i] = '-'; }
}
blob_init(&log, 0, 0);
backofficeBlob = &log;
blob_appendf(&log, "%s %s", db_text(0, "SELECT datetime('now')"), zName);
}
/* Here is where the actual work of the backoffice happens */
nThis = alert_backoffice(0);
if( nThis ){ backoffice_log("%d alerts", nThis); nTotal += nThis; }
nThis = hook_backoffice();
if( nThis ){ backoffice_log("%d hooks", nThis); nTotal += nThis; }
/* Close the log */
if( backofficeFILE ){
if( nTotal || backofficeLogDetail ){
if( nTotal==0 ) backoffice_log("no-op");
#if !defined(_WIN32)
gettimeofday(&sEnd,0);
backoffice_log("elapse-time %d us", tvms(&sEnd) - tvms(&sStart));
#endif
fprintf(backofficeFILE, "%s\n", blob_str(backofficeBlob));
}
fclose(backofficeFILE);
}
}
/*
** COMMAND: backoffice*
**
** Usage: %fossil backoffice [OPTIONS...] [REPOSITORIES...]
**
** Run backoffice processing on the repositories listed. If no
** repository is specified, run it on the repository of the local check-out.
**
** This might be done by a cron job or similar to make sure backoffice
** processing happens periodically. Or, the --poll option can be used
** to run this command as a daemon that will periodically invoke backoffice
** on a collection of repositories.
**
** If only a single repository is named and --poll is omitted, then the
** backoffice work is done in-process. But if there are multiple repositories
** or if --poll is used, a separate sub-process is started for each poll of
** each repository.
**
** Standard options:
**
** --debug Show what this command is doing
**
** --logfile FILE Append a log of backoffice actions onto FILE
**
** --min N When polling, invoke backoffice at least
** once every N seconds even if the repository
** never changes. 0 or negative means disable
** this feature. Default: 3600 (once per hour).
**
** --poll N Repeat backoffice calls for repositories that
** change in appoximately N-second intervals.
** N less than 1 turns polling off (the default).
** Recommended polling interval: 60 seconds.
**
** --trace Enable debugging output on stderr
**
** Options intended for internal use only which may change or be
** discontinued in future releases:
**
** --nodelay Do not queue up or wait for a backoffice job
** to complete. If no work is available or if
** backoffice has run recently, return immediately.
**
** --nolease Always run backoffice, even if there is a lease
** conflict. This option implies --nodelay. This
** option is added to secondary backoffice commands
** that are invoked by the --poll option.
*/
void backoffice_command(void){
int nPoll;
int nMin;
const char *zPoll;
int bDebug = 0;
int bNoLease = 0;
unsigned int nCmd = 0;
if( find_option("trace",0,0)!=0 ) g.fAnyTrace = 1;
if( find_option("nodelay",0,0)!=0 ) backofficeNoDelay = 1;
backofficeLogfile = find_option("logfile",0,1);
zPoll = find_option("poll",0,1);
nPoll = zPoll ? atoi(zPoll) : 0;
zPoll = find_option("min",0,1);
nMin = zPoll ? atoi(zPoll) : 3600;
bDebug = find_option("debug",0,0)!=0;
bNoLease = find_option("nolease",0,0)!=0;
/* Silently consume the -R or --repository flag, leaving behind its
** argument. This is for legacy compatibility. Older versions of the
** backoffice command only ran on a single repository that was specified
** using the -R option. */
(void)find_option("repository","R",0);
verify_all_options();
if( g.argc>3 || nPoll>0 ){
/* Either there are multiple repositories named on the command-line
** or we are polling. In either case, each backoffice should be run
** using a separate sub-process */
int i;
time_t iNow = 0;
time_t ix;
i64 *aLastRun = fossil_malloc( sizeof(i64)*g.argc );
memset(aLastRun, 0, sizeof(i64)*g.argc );
while( 1 /* exit via "break;" */){
time_t iNext = time(0);
for(i=2; i<g.argc; i++){
Blob cmd;
if( !file_isfile(g.argv[i], ExtFILE) ){
continue; /* Repo no longer exists. Ignore it. */
}
if( iNow
&& iNow>file_mtime(g.argv[i], ExtFILE)
&& (nMin<=0 || aLastRun[i]+nMin>iNow)
){
continue; /* Not yet time to run this one */
}
blob_init(&cmd, 0, 0);
blob_append_escaped_arg(&cmd, g.nameOfExe, 1);
blob_append(&cmd, " backoffice --nodelay", -1);
if( g.fAnyTrace ){
blob_append(&cmd, " --trace", -1);
}
if( bDebug ){
blob_append(&cmd, " --debug", -1);
}
if( nPoll>0 ){
blob_append(&cmd, " --nolease", -1);
}
if( backofficeLogfile ){
blob_append(&cmd, " --logfile", -1);
blob_append_escaped_arg(&cmd, backofficeLogfile, 1);
}
blob_append_escaped_arg(&cmd, g.argv[i], 1);
nCmd++;
if( bDebug ){
fossil_print("COMMAND[%u]: %s\n", nCmd, blob_str(&cmd));
}
fossil_system(blob_str(&cmd));
aLastRun[i] = iNext;
blob_reset(&cmd);
}
if( nPoll<1 ) break;
iNow = iNext;
ix = time(0);
if( ix < iNow+nPoll ){
sqlite3_int64 nMS = (iNow + nPoll - ix)*1000;
if( bDebug )fossil_print("SLEEP: %lld\n", nMS);
sqlite3_sleep((int)nMS);
}
}
}else{
/* Not polling and only one repository named. Backoffice is run
** once by this process, which then exits */
if( g.argc==3 ){
g.zRepositoryOption = g.argv[2];
g.argc--;
}
db_find_and_open_repository(0,0);
if( bDebug ){
backofficeLogDetail = 1;
}
if( bNoLease ){
backoffice_work();
}else{
backoffice_thread();
}
}
}
/*
** This is the main interface to backoffice from the rest of the system.
** This routine launches either backoffice_thread() directly or as a
** subprocess.
*/
void backoffice_run_if_needed(void){
if( backofficeDb==0 ) return;
if( strcmp(backofficeDb,"x")==0 ) return;
if( g.db ) return;
if( g.repositoryOpen ) return;
#if defined(_WIN32)
{
int i;
intptr_t x;
char *argv[4];
wchar_t *ax[5];
argv[0] = g.nameOfExe;
argv[1] = "backoffice";
argv[2] = "-R";
argv[3] = backofficeDb;
ax[4] = 0;
for(i=0; i<=3; i++) ax[i] = fossil_utf8_to_unicode(argv[i]);
x = _wspawnv(_P_NOWAIT, ax[0], (const wchar_t * const *)ax);
for(i=0; i<=3; i++) fossil_unicode_free(ax[i]);
backofficeTrace(
"/***** Subprocess %d creates backoffice child %lu *****/\n",
GETPID(), GetProcessId((HANDLE)x));
if( x>=0 ) return;
}
#else /* unix */
{
pid_t pid = fork();
if( pid>0 ){
/* This is the parent in a successful fork(). Return immediately. */
backofficeTrace(
"/***** Subprocess %d creates backoffice child %d *****/\n",
GETPID(), (int)pid);
return;
}
if( pid==0 ){
/* This is the child of a successful fork(). Run backoffice. */
int i;
setsid();
for(i=0; i<=2; i++){
close(i);
open("/dev/null", O_RDWR);
}
for(i=3; i<100; i++){ close(i); }
g.fDebug = 0;
g.httpIn = 0;
g.httpOut = 0;
db_open_repository(backofficeDb);
backofficeDb = "x";
backoffice_thread();
db_close(1);
backofficeTrace("/***** Backoffice Child %d exits *****/\n", GETPID());
exit(0);
}
fossil_warning("backoffice process %d fork failed, errno %d", GETPID(),
errno);
}
#endif
/* Fork() failed or is unavailable. Run backoffice in this process, but
** do so with the no-delay setting.
*/
backofficeNoDelay = 1;
db_open_repository(backofficeDb);
backofficeDb = "x";
backoffice_thread();
db_close(1);
}